Hitachi CP-S830W/E Before use, Instructions to Users, Video signal cables, Power cord

Page 3

WARNING:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications, Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Instructions to Users:

This equipment complies with the requirements of FCC (Federal Communication Commission) Class A equipments provided that following conditions are met.

(1) Video signal cables:

Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal pipes or similar way to reduce the interference noise radiation.

(2) Power cord:

Shielded power cord must be used. The outer shield must be connected to the ground.

(3) Video inputs:

The input signal amplitude must no exceed the specified level.

Before use

(Before Use)

Illustrated marks Various illustrated marks are used in this product and instruction manual so the product is used correctly and safely, and also to protect you and others from danger and your property from being damaged.

This shows that a person could be killed or injured if the Warning wrong operation is done by ignoring this indication.

This shows that a person could be injured or material may be Caution damaged if the wrong operation is done by ignoring this

indication.

ENGLISH

Examples of

illustrated marks

The mark informs you that there is a warning (including caution). The concrete details of the warning (the left diagram shows the caution for an electric shock hazard) is shown in the diagram.

The mark informs you of a prohibited action. The concrete prohibited action (the left diagram shows the prohibition of disassembly) is drawn in the diagram or near it.

The mark informs you of actions you must do. The concrete instruction details (the left diagram shows "Disconnect the power plug from the power outlet") is drawn in the diagram.

3

Image 3
Contents Operating Guide FeaturesContents OutlineFor the Customers in U.K Instructions to Users Video signal cablesPower cord Before useIf any abnormality occurs Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place Do not use power supplies other Than that specifiedDo not step on this unit or do not put a Heavy object on it Be careful in handling the power cordCleaning Handle the power cord carefullyVolume When you are not going to use For a long timeClean inside the unit at least once two years Do not place this unit where it gets hotMain unit Names and functions of each partVideo input terminal AC in socket Main Power switchRemote control sensor RGB input terminal RGB output terminalRemote control transmitter Replace the cover How to insert batteriesView from the top InstallationExample of the projector and screen installation How to use foot adjustersTo project the picture Basic operationsPLUG&PLAY To turn off the powerAdjustments and functions To return to the initial settingMemory function Adjustment Item Details of adjustment SET UPImage InputMenu OPT. allows you to control communication function etc OPTConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Resolution Standard Display DotsKHz Type Computer/signal Horizontal Timing µs Initial set signalsControl signal terminal Connection to the control signal terminalPS/2 mouse ADB Mac mouseSerial mouse Control command table Control command tableCommunication Control data table Example of command error Procedure of getting the Projector statusProcedure of setting the Projector status Procedure of default setting the Projector statusConnecting various equipment Example of system setupClean the air filter using a vacuum cleaner Cleaning the air filterHow to replace lamp Remove the lamp coverLoosen two screws and pull Handle to remove Lamp.Screw On-screen display Reset the lamp timeLamp Message tableWhen you think something wrong Specifications