Setting Up (continued)
Adjusting The Projector's Elevator
CAUTION • If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
1 Press and hold in the elevator buttons.
2 | Raise or lower the projector to the |
| desired height and then release the |
| elevator buttons. |
| When you release the elevator buttons, the elevator |
| feet will lock into position. |
|
|
|
|
3 | As necessary, you can also finely |
| adjust the height of the projector by |
twisting the elevator feet by hand.
Elevator feet
Elevator buttons
Using The Picture Shift Dials
The lens of this projector can be shifted horizontally and vertically. When you want to finely adjust the picture position, use the picture shift dials.
1Using the horizontal picture shift dial shifts the picture to right or left.
2Using the vertical picture shift dial shifts the picture upward or downward.
1Horizontal picture shift dial
7.5:2.5
to
2.5:7.5
2 Vertical picture shift dial
10:0
to
0:10
NOTE • Generally, better quality of a picture is available when the lens shift is set to the center.
•Do not attach anything other than specified options (such as an optional conversion lens) to the screw thread. For details, please ask your dealer.
8