Hitachi HDPJ52 user manual Computer signal examples, About Plug-and-Play capability, Vesa Text

Page 16

Preparations

Computer signal examples

Resolution (HxV)

H. frequency (kHz)

V. frequency (Hz)

Rating

Signal mode

 

 

 

 

 

720 x 400

37.9

85.0

VESA

TEXT

640 x 480

31.5

59.9

VESA

VGA (60Hz)

640 x 480

37.9

72.8

VESA

VGA (72Hz)

640 x 480

37.5

75.0

VESA

VGA (75Hz)

640 x 480

43.3

85.0

VESA

VGA (85Hz)

800 x 600

35.2

56.3

VESA

SVGA (56Hz)

800 x 600

37.9

60.3

VESA

SVGA (60Hz)

800 x 600

48.1

72.2

VESA

SVGA (72Hz)

800 x 600

46.9

75.0

VESA

SVGA (75Hz)

800 x 600

53.7

85.1

VESA

SVGA (85Hz)

1024 x 768

48.4

60.0

VESA

XGA (60Hz)

1024 x 768

56.5

70.1

VESA

XGA (70Hz)

1024 x 768

60.0

75.0

VESA

XGA (75Hz)

1280 x 720

44.7

60.0

VESA

-

1280 x 1024

64.0

60.0

VESA

SXGA (60Hz)

NOTE Full-size display may not be possible with some input signals. Refer to the resolutions above.

Although the projector can display signals with resolution up to SXGA (1280x1024), signals will be converted to the projector’s panel resolution before being displayed. The best display performance is achieved when the resolutions of the input signal and projector panel are identical.

For some input types when the screen resolution is changed on a computer, the automatic adjustment function may take a long time or may not complete. If this happens, you may not be able to see the “Yes/No” check box to confirm the resolution change in Windows. The screen resolution will then be reset to the previous resolution. It is recommended to use a CRT or LCD monitor to change the resolution if this occurs.

About Plug-and-Play capability

Plug-and-Play is a system composed of a computer, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible.

Take advantage of this feature by connecting an RGB cable to the COMPUTER port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

This projector behaves as a standard Plug-and-Play monitor and uses the standard monitor drivers provided with your operating system.

16

Image 16
Contents Thank you for purchasing this projector Trademark acknowledgmentBefore use PreparationsProjection Basic operationMaintenance TroubleshootingWarranty and after-service Specifications Advanced MenuProjector features About this manualAbout contents of package Part names ProjectorPorts Control buttonsComponent Video CONTRAST, Bright Remote controlPC, HDMI, Compo Strap Fastening the lens coverStrap hole Rivet Arrangement On a horizontal surface Suspended from the ceilingFor 169 screens For 43 screensAdjusting the projector’s elevation Connecting your devices With a VCR/DVD playerFor a DVI signal source For an Hdmi signal sourceFor an Scart RGB input With a computer Optional UseComputer signal examples About Plug-and-Play capabilityVesa Text VesaConnecting the power supply Using the cable coverLoading batteries into the remote control Using the remote control Using the remote control button lightsRemote control Sensor Approximately Light buttonTurning the power on Power buttonPower indicator STANDBY/ON buttonSelecting an input signal Automatically adjusting the pictureAdjusting the display position Adjusting the zoomAdjusting the focus Zoom ringTurning the power off  For no signal or an unrecognized signal 169 fixed 169Wide MOVIE1 MOVIE2Bright DarkMode Gamma Color Iris TempNormal Standard Cinema LOWBright Dark Turn OFFAUTO1 AUTO2To load saved adjustment settings MY MemoryTo save adjustment settings  MY MEMORYTo display a menu when no menu is currently displayed To switch from the Advanced Menu to the Easy MenuEasy Menu operation To change the display languageTo reset the operation Easy Menu functionsTo operate the selected item To close the menu Normal  Cinema LOW Cinema High  MusicDarker  Brighter Weaker  StrongerReddish  Greenish MirrorReset English  Français  Deutsch  EspañolItaliano  Norsk  Nederlands  Português Language Svenska  Русский  Suomi  Polski  TürkçeTo switch from the Easy Menu to the Advanced Menu Advanced Menu operationTo reset the menu settings To select a menuPicture menu  Standard High  CUSTOM-1, CUSTOM-2, CUSTOM-3, CUSTOM-4Description To adjust a Custom mode Step Ramp Gray scaleThese modes set the same color temperature as the mode name 6500K  7500K  9300K  Hi-BRIGHTCUSTOM-1  CUSTOM-2  CUSTOM-3  CUSTOM-4  6500K, 7500K, 9300KStep  Ramp Gray scale Greenish  ReddishIris Description To save adjustment settings MemoryImage menu Using the / cursors buttons changes the aspect ratioOver Scan  For a signal from the Computer port  For a signal from the Hdmi port For a signal from the Component Video ports  For a signal from the S-VIDEO or Video portInput menu TV  Film  Turn OFF Film  AutoComponent  Scart RGB  Component Scart RGB  NTSC, PAL, SECAM, NTSC4.43, M-PAL, N-PALExample for computer RGB signals Example for an Hdmi signalExample for a video, s-video and component video signal Example for a Scart RGB signalSetup menu Reduce top of the image  Reduce bottom of the imageKeystone Normal  WhisperLanguage Screen menuMenu Position MyScreen  Original  Turn OFF  MyScreenStart UP  OriginalMessage Using the / cursor buttons switches between the dialogs To move the black bars up and downOption menu Reset  CancelLong max min.  Short min min FAN Speed  Ghost  Stripe Factory Reset  Filter Message Using the / cursor buttons changes the rotationHigh  Normal GhostFilter Message Factory Reset50h  100h  200h  300h  Turn OFF Lamp Replacing the lamp by yourself Bottom Projector Lamp cover ScrewFilter Air filterAir filter Knobs Maintenance Inside of the projector Cabinet and Remote controlLens There is no input signal Horizontal or vertical wavelength of the input signalInternal temperature is high Related messagesRegarding the indicator lamps Power Lamp TempIndicator Cooling fan is not operating It is time to clean the air filterThere is a possibility that the interior of the projector Has overheatedMain power source has been interrupted during operation By a power outage blackout, etcSignal cables are not correctly connected Lens cover is closedBrightness is adjusted to an extremely low level Menu function or the remote controlColor settings are not correctly adjusted Color Space setting is not suitableSet the Whisper item 48 in the Setup menu to Normal Whisper function is workingWhisper function may cause screen flicker Fan speed has been automatically changedSpecification RGB input portDigital input port Communication portDimension diagram Unit mmEntry Explanation Interface which is an interface standard for40, 43, 44 NtscScart PALSecam