Hitachi HDPJ52 user manual Up  Down, Left  Right, Right  Left, Large  Small

Advanced Menu (IMAGE menu)

Item

Description

	Using the ▲/▼ cursor buttons adjusts the vertical position of the picture.
V POSITION	Up  Down
	- NOTE -
	• The V POSITION cannot be adjusted for signals from the HDMI port.
	Using the ▲/▼ cursor buttons adjusts the horizontal position of the picture.
H POSITION	Left  Right
	- NOTE -
	• The H POSITION cannot be adjusted for signals from the HDMI port.
	Using the ▲/▼ cursor buttons adjusts the horizontal phase to
	eliminate flicker.
H PHASE	Right  Left
	- NOTE -
	• The H PHASE can be adjusted only for computer (RGB) signals
	excluding SCART RGB signals, or component video signals
	excluding 525i (480i) and 625i (576i) signals.
	Using the ▲/▼ cursor buttons adjusts the horizontal size of the picture.
	Large  Small
	- NOTE -
H SIZE	• The H SIZE can be adjusted only for computer (RGB) signals
	excluding SCART RGB signals.
	• When this adjustment is excessive, the picture may not be
	displayed correctly. If this occurs, please reset the adjustment by
	pressing the RESET button while using this item.
	This function is performed as soon as the ► cursor button is
	pressed to select this item.
	 For a signal from the COMPUTER port
	The vertical position, the horizontal position, the horizontal phase,
	horizontal size and the aspect ratio are automatically adjusted.
	Make sure that the application window is set to its maximum
	size before attempting to use this feature. A dark picture may be
	incorrectly adjusted. Use a bright picture when adjusting.
	 For a signal from the HDMI port
	The aspect ratio is automatically adjusted.
AUTO ADJUST	 For a signal from the COMPONENT VIDEO ports
	The vertical position, horizontal position and aspect ratio are
	automatically adjusted. The horizontal phase is also automatically
	adjusted except for 525i (480i), 625i (576i) and SCART RGB signals.
	 For a signal from the S-VIDEO or VIDEO port
	The video format best suited for the respective input signal is
	automatically selected. This function is available only when the
	VIDEO FORMAT item in the INPUT menu (46) is set to AUTO.
	The vertical position, horizontal position and aspect ratio are
	automatically adjusted.

- NOTE -

•The automatic adjustment operation takes approximately 10 seconds. Automatic adjustment may not function correctly with some input signals.

44