Hitachi HDPJ52 user manual MyScreen  Original  Turn OFF,  MyScreen, Start UP,  Original

Advanced Menu (SCREEN menu)

Item	Description
	Using the ▲/▼ cursor buttons changes the start up image that is
	displayed when no signal or an unsuitable signal is detected.
	MyScreen  ORIGINAL  TURN OFF
	 MyScreen
	MyScreen is a feature which allows you to save a screenshot to
	use in place of the default screen. Please refer to the description
	of MyScreen ( Below) for information on saving a screen using
	the MyScreen function. Until a screenshot is registered a plain
START UP	blue screen is displayed as the MyScreen image.
	 ORIGINAL
	When ORIGINAL is selected a factory pre-set start up screen is
	displayed.
	 TURN OFF
	When TURN OFF is selected a plain black screen is displayed.
	- NOTE -
	• To prevent burn-in (burned in afterimage) the MyScreen and
	ORIGINAL screens will switch to a plain black screen after several
	minutes.

	This projector has a MyScreen function which allows the user to
	save a portion of an image to be used as the START UP image by
	following the procedure below. See the description of START UP (
	above) for information on selecting a START UP image.
	First, input the signal and display the image you wish to save. Then,
	in the SCREEN menu select the MyScreen item and press the
	ENTER button or the ► cursor button.
		MyScreen
	(1) The “Do you start capturing this
		Do you start capturing this picture?
	picture?” dialog will be displayed.
		RESET :NO              ENTER :YES
	Press the ENTER button and the			↓
	dialog will change and a frame to
	select the portion of the image to
	save will appear..
MyScreen	(2) Use the ▲/▼/◄/► cursor buttons
		MyScreen
	to move the frame and select the	Move the capture area
		as you want.
	portion of the image you wish to
		RESET :RETURN          ENTER :NEXT
				↓
	save, then press the ENTER button.
	The projector will then begin saving
		MyScreen
			▼
	the image (may take several				45%
			△
	minutes).

(3)When the operation ends, a dialog will appear informing you of the result.

Registration successful screen: ... MyScreen registration is finished.

................................Error screen:	Please try again.
	A capturing error has occurred.

- NOTE -

•The KEYSTONE cannot be adjusted while using the MyScreen function.

(Continued on next page)

50