Hitachi HDPJ52 Image menu, Using the / cursors buttons changes the aspect ratio, Over Scan

Advanced Menu (IMAGE menu)

IMAGE menu

The following functions are accessible via the IMAGE menu. After selecting an item according to the procedure described in the preceding "Advanced Menu operation" section (35), refer to the following table for details on operating the selected item.

MENU [COMPUTER]		:SELECT
PICTURE	ASPECT         4:3
IMAGE	OVER SCAN      5		ENGLISH
INPUT	V POSITION     25
SETUP	H POSITION     142
SCREEN	H PHASE        16
OPTION	H SIZE         1344
EASY MENU	AUTO ADJUST

Item	Description
	Using the ▲/▼ cursors buttons changes the aspect ratio.
	 For a computer (RGB) signal
	NORMAL  4:3  16:9
	 For an HDMI signal
	NORMAL  4:3  16:9  WIDE  MOVIE1  MOVIE2 14:9
	 For a video, s-video or component video signal
	4:3  16:9  WIDE  MOVIE1  MOVIE2  14:9

For no signal or an unrecognized signal

ASPECT	16:9 (fixed)
		4:3	16:9	WIDE	MOVIE1 MOVIE2	14:9
	Example for		16:9
	a 16:9 signal		NORMAL
	Example for	4:3
	a 4:3 signal	NORMAL

	- NOTE -
	• The NORMAL mode uses the signal’s original aspect ratio.
	• Performing an automatic adjustment initializes the aspect ratio
	setting.
	• The ASPECT function can also be accessed using the ASPECT
	button on the remote control (24) or via the EASY MENU (31).
	Using the ▲/▼ cursor buttons adjusts the over-scan ratio.
	Large (Reduces the picture)  Small (Magnifies the picture)
	- NOTE -
OVER SCAN	• The OVER SCAN function can only be used for video, s-video,
	component video or HDMI signals.
	• When this adjustment is too large, certain degradation may appear
	on the border of the picture. If this occurs, readjust.
	• The numbers displayed in the dialog and the IMAGE menu, are
	just for your reference, and might not be the exact display ratio.

(Continued on next page)

43