Hitachi HDPJ52 Using the remote control button lights, Remote control Sensor Approximately

Preparations

Using the remote control

The remote control works with the projector’s remote sensor.

The range of the remote sensor is

60-degrees (30-degrees to the left and right of the remote sensor) within 3 meters.

The remote signal may also be able to be reflected off the screen etc. If it is difficult to send the remote signal to the sensor directly, try to reflect the signal.

Remote control

sensor

30°	Approximately
30°	3m

ENGLISH

The remote control uses infrared light to send signals to the projector (Class1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control’s signal to the projector.

Using the remote control button lights

When using the remote control in the dark, the buttons of the remote control can light up.

1. Pressing the LIGHT button turns the remote control button lights on. The lights will automatically turn off after a short time.

LIGHT button

POWER LIGHT

BLACK MODE MEMORY

ASPECT IRIS

ENTER

MENU RESET

BRIGHT CONTRAST COLOR

HDMI PC AUTO

COMPO S-VIDEO VIDEO

CAUTION ► Be careful when handling the remote control. Incorrect handling could cause damage and/or malfunction.

•Do not drop, hit or otherwise jar the remote control in anyway.

•Do not get the remote control wet or place it on wet objects.

•If you will not use the remote control for an extended period, remove the batteries from the remote control and store them in a safe place.

NOTE • If the remote control starts to malfunction, replace the batteries.

•The remote control may not function correctly if strong light (such as direct sunlight) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the projector’s remote sensor. Adjust the position of the projector so that light does not shine directly on the projector's remote sensor.

19