Hitachi HDPJ52 user manual Iris

Advanced Menu (PICTURE menu)

Item	Description
	Using the ▲/▼ cursor buttons adjusts the picture.
IRIS	Bright  Dark
	- NOTE -
	• The IRIS function can also be accessed using the IRIS button and
	▲/▼ cursor buttons on the remote control (25).
	Using the ▲/▼ cursor buttons changes the auto iris control mode as
	follows.
	TURN OFF  AUTO1  AUTO2
	 TURN OFF
	The auto iris is always open.
	 AUTO1
BLACK	The auto iris displays a better black for dark images.
	 AUTO2
	The auto iris displays the best black for dark images.

- NOTE -

•The screen may flicker when the AUTO1 or AUTO2 modes are selected. If this occurs, select TURN OFF.

•The BLACK function can also be accessed using the BLACK button and the ▲/▼ cursor buttons on the remote control (27) or via the EASY MENU (32).

This projector provides 4 memories to save user adjustment settings. The brightness, contrast, color, tint, sharpness and iris adjustment settings, and selected modes for gamma, color temperature, black, whisper and digital shutter can be saved to each memory. MY MEMORY

	To load saved adjustment settings	2.CUSTOM‑2
		1.CUSTOM‑1
	Using the ▲/▼ cursor buttons in the MY MEMORY menu	3.CUSTOM‑3
	changes the memory to be adjusted, memories in which	4.CUSTOM‑4
		SAVE
	no data is saved are skipped. The mode that the yellow	MY MEMORY
	highlight bar is on is the currently selected mode. Then
		menu (small)
MY MEMORY	press the ► cursor button to load the selected mode.
	1. CUSTOM-1  2. CUSTOM-2  3. CUSTOM-3  4. CUSTOM-4  SAVE

- NOTE -

•The numbers to the left of each memory cannot be changed but the name to the right can be changed.

•The SAVE item is not a memory but an item to display the MY MEMORY menu and save to the currently selected memory. Please refer to the following description about save.

•When a signal other than the signal used when the adjustment settings were registered is input, the saved adjustment settings may not display the signal image correctly.

(Continued on next page)

ENGLISH

41