Hitachi HDPJ52 FAN Speed  Ghost  Stripe Factory Reset  Filter Message, High  Normal

 STRIPE

    Low    High

 R: +0 +0

 G: +0 +0

 B: +0 +0

↓

L H +0 +0

STRIPE G

R G B

+0 +0 +0 GHOST

Advanced Menu (OPTION menu)

Item

Description

SERVICE

The projector has some additional functions as	SERVICE
follows.	GHOST
	FANSPEED       NORMAL
Select an item using the ▲/▼ cursor buttons in the	FILTER MESSAGE 100h STRIPE
SERVICE menu, and press the cursor ► button.	FACTORY RESET
Then a dialog or sub-menu will appear.

FAN SPEED  GHOST  STRIPE
	
FACTORY RESET  FILTER MESSAGE
FAN SPEED		FANSPEED
Using the ▲/▼ cursor buttons changes the rotation		NORMAL
		HIGH

speed of the built-in cooling fans.

HIGH  NORMAL

The HIGH mode is for use at high elevations.

- NOTE -

•HIGH mode may shorten the lifetime of the lamp. Except for use at high elevations, please use the NORMAL mode.

•Note that the projector is noisier when HIGH is selected.

GHOST

If a ghost image appears, the following adjustment may resolve it.

(1)Select a color element using the ◄/► cursor buttons in the GHOST menu.

R (Red)  G (Green)  B (Blue)

(2)Adjust the selected color using ▲/▼ cursor buttons to remove the ghost image.

STRIPE

Vertical stripes may appear on the screen with some signals. This is not a hardware failure but a phenomenon common to LCD panels. The following procedure may improve the stripes, although it may not correct them completely.

Make adjustments while referring to the test

pattern displayed in the background of the menu or dialog.

(1) Select a color element using the ▲/▼ cursor buttons in the STRIPE menu.

R (Red)  G (Green)  B (Blue)

(2) Press the ► cursor button and a dialog will

appear.

(3) Select H or L using the ◄/► cursor buttons. L (Dark side)  H (Bright side)

(4) Adjust the tone of selected color using the ▼/▲ cursor buttons to improve the stripes.

Be sure to make adjustments for every color element.

(Continued on next page)

54