Epson IWE3200-H manual Save, Save & Restart, and Cancel Commands, Home and Refresh Commands

„Access Rules. Settings for the time frame policy to Permit/Deny administrator to access the IWE3200-H.

„LAN Device Management. Settings for the Router to know what LAN devices it has to manage.

zStatus. System monitoring information.

„Associated Wireless Clients. Display the status of all wireless clients who associated to IWE3200-H.

„Authenticated Users. Display the status of the users who have been authenticated by IWE3200-H. Authenticated users can be also forced terminated in this table.

„Account Table. Generate the new users in the authentication mode by Local Accounts. Billing ticket will be also generated and printed by pressing ‘Generator’ button on this page.

„Account Statistics. Display the statistics for the account table.

„Session list. Display the status of session traffic of IWE3200-H.

„Managed LAN Devices. Display the status of local LAN devices which connected to

IWE3200-H.

2.8.2. Save, Save & Restart, and Cancel Commands

Fig. 33. Save, Save & Restart, and Cancel.

At the bottom of each page, there are up to three buttons—Save, Save & Restart, and Cancel. Click- ing Save stores the settings changes to the memory of the Router and brings you back to the start page. Clicking Save& Restart stores the settings changes to the memory of the Router and restarts the Router immediately for the settings changes to take effect. Clicking Cancel discards any settings changes and brings you back to the start page.

If you click Save, the start page will reflect the fact that the configuration settings have been changed by showing two buttons—Restartand Cancel. In addition, changes are highlighted in red. Clicking Cancel discards all the changes. Clicking Restart restarts the Router for the settings changes to take effect.

2.8.3. Home and Refresh Commands

Fig. 34. Home and Refresh.

27