Epson IWE3200-H manual First-Time Installation and Configuration, Selecting a Power Supply Method

Page 13

2. First-Time Installation and Configuration

2.1. Selecting a Power Supply Method

The IWE3200-Hcan be powered by either the supplied AC power adapter or the optional IWE500-INJPOE Power Injector. The IWE3200-Hautomatically selects the suitable power de- pending on your decision.

To power the IWE3200-Hby the supplied power adapter:

1.Plug the power adapter to an AC socket.

2.Plug the connector of the power adapter to the power jack of the IWE3200-H.

NOTE:

This product is intended to be power-supplied by a Listed Power Unit, marked “Class 2” or “LPS” and output rated “12V DC, 1.25 A minimum” or equivalent statement.

To power the IWE3200-Hby IWE500-INJ Power Injector:

1.Connect the power cord cable from power outlet to the IWE500-INJpower connector.

To Power Outlet

Fig. 2. Connecting the power cord cable to IWE500-INJ.

2.Check the “POWER” LED: if system is normal, the LED will be on (Green light); otherwise, the “POWER” LED will be off.

3.Connect the Ethernet cable (RJ-45 Category 5) from Ethernet Hub/Switch to the “DATA IN” port of IWE500-INJPower Injector.

4.Connect another Ethernet cable (RJ-45 Category 5) from “POWER & DATA OUT” port of the IWE500-INJPower Injector to the IWE3200-H. Please note the indication on the panel of POE-enabled RJ45 port of IWE3200-H(LAN interface #4).

Fig. 3. POE enabled LAN Port Position.

8

Image 13

Contents User’s Guide Federal Communication Commission Interference Statement TTE Compliance Statement Table of Contents Page Overview IntroductionUser Authentication, Authorization, and Accounting FeaturesIeee 802.11b/g Compliant „ Wireless Operation Internet Connection Sharing Network Security Management Firmware ToolsPage LED Definition Feature ComparisonSelecting a Power Supply Method First-Time Installation and ConfigurationMounting the IWE3200-H on a wall Mounting the IWE3200-H on a WallConnecting the Managing Computer and the IWE3200-H Preparing for ConfigurationChanging the TCP/IP Settings of the Managing Computer Configuring the IWE3200-HEntering the User Name and Password Home Setup Wizard Selecting an Operational ModeRouter with a PPPoE-Based DSL/Cable Connec- tion Setup Wizard Configuring TCP/IP SettingsRouter with a DHCP-Based DSL/Cable Connec- tion Router with a Multiple DSL/Cable Connections Router with a Static-IP DSL/Cable ConnectionSetup Wizard Configure Ieee 802.11 Set- tings Setup Wizard Dhcp Server SettingsWeb Redirection Configuring User Authentication SettingsTo setup the Local Authentication method Local Authentication SeverPage To setup the mini-POS Ticket Printer How to Setup the mini-POS Ticket PrinterUsage of control keypad Ieee Configuring Radius SettingsDeploying the IWE3200-H Configuring Ieee 802.11-Related Settings Setting up Client ComputersTo establish a wireless link to an AP Configuring TCP/IP-Related Settings Authentication success Menu Structure Using Web-Based Network ManagementAAA. Authentication, Authorization, and Accounting settings Home and Refresh Commands Save, Save & Restart, and Cancel CommandsIWE3200-H Authenticated Users Associated Wireless ClientsSeeing Status Session List Account TableSystem Specifying Operational ModeManaged LAN Devices Page Backing up and Restoring Configuration Set- tings by Http Changing PasswordTo upgrade firmware of the access Router by Http Managing FirmwareTo restore configuration of the access Router by Http To back up configuration of the access Router by HttpUpgrading Firmware by Tftp TIP To upgrade firmware of the access Router by TftpTo back up configuration of the access Router by Tftp Backing up and Restoring Configuration Set- tings by TftpTo restore configuration of the IWE3200-H by Tftp Setting Time Zone Configuring TCP/IP Related SettingsResetting Configuration to Factory Defaults AddressRouter with a PPPoE-Based DSL/Cable Con- nection Router with a Static-IP DSL/Cable Connection Router with Multiple DSL/Cable Connections DNSDNS Proxy Static DNS Mappings NATBasic To give an internal server a domain nameDhcp Server To expose preset internal serversVirtual Server Mappings FunctionalityStatic Dhcp Mappings Load Balancing Load Balancing Policy SettingsZero Client Reconfiguration Configuring Wireless SettingsCommunication Wireless Distribution System To enable a WDS link Wireless Distribution System settingsSecurity Page Set the Access control type to exclusive MAC-Address-Based Access ControlTo delete an entry in the access control table Web-redirection mechanism Web RedirectionWeb redirection enabled with authentication Unrestricted Clients Default authentication failure warningTo specify a uncontrolled computer by MAC address Walled GardenTo add a link to the walled garden Radius Robustness Authentication Page Customization Authentication Session ControlTo specify an advertisement link Authentication success page customization settingsDdns Advertisement links settingsFilters and Firewall Configuring Advanced SettingsPacket Filters To set a rule for packet filteringFirewall VlanURL Filters UPnP ManagementTo block Http traffic to an unwelcome Web site System Log Snmp LAN Device ManagementTo specify a trap target To specify a LAN device to manage Example for LAN device managementDefault Settings LED Definitions AuthenticationRear Panel DNS ProxyTCP/IP Settings Problems Appendix B TroubleshootingIWE3200-H does not respond to ping from the client computer Cannot access the Internet Wireless Settings ProblemsWireless Gateway/AP Browse Other ProblemsIWE3200-H Power Supply Configuration and ManagementDimensions without antenna WeightIWE500-INJ Power Injector IWE810-POS mini-POS Ticket Printer