Epson IWE3200-H manual Wireless Settings Problems, Cannot access the Internet

‹Find out the answer on the start page of the Web-Based Network Manager.

„Is the NAT server functionality of the IWE3200-H enabled?

‹Find out the answer on the start page of the Web-Based Network Manager.

„If you cannot find any incorrect settings of the IWE3200-H, the default Router of the IWE3200-H may be really down or there are other communication problems on the net- work backbone.

zThe DNS server(s) of the IWE3200-H do not respond to ping from the client com- puter.

„Solve the preceding problems first.

„If you cannot find any incorrect settings of the IWE3200-H, the default Router of the IWE3200-H may be really down or there are other communication problems on the net- work backbone.

zCannot access the Internet.

„Solve the preceding problems first.

„Make sure there are no incorrect packet filter settings that would block the traffic from the local computer to the Internet. In case you are not sure, the last resort may be resetting the configuration settings of the IWE3200-H to default values by press the Default or Soft-Resetswitch.

B-2: Wireless Settings Problems

zThe wireless client computer cannot associate with an IWE3200-H.

„Is the wireless client set in infrastructure mode?

‹Check the operating mode of the WLAN NIC.

„Is the SSID of the WLAN NIC identical to that of the prospective IWE3200-H?

‹Check the SSID setting of the WLAN NIC and of the IWE3200-H.

„Is the WEP functionality of the prospective IWE3200-Henabled?

‹Make appropriate WEP settings of the client computer to match those of the

IWE3200-H.

„Is the prospective IWE3200-Hwithin range of wireless communication?

‹Check the signal strength and link quality sensed by the WLAN NIC.

70