Epson IWE3200-H manual Static Dhcp Mappings

Page 47

2.11.4.2. Basic

Fig. 64. Basic DHCP server settings.

The Router can automatically assign IP addresses to client computers by DHCP. In this section of the management page, you can specify the Default Router, Subnet mask, Primary DNS server, and Secondary DNS server settings that will be sent to a client at its request. Additionally, you can spec- ify the first IP address that will be assigned to the clients and the number of allocateable IP addresses.

In most cases, Default Router and Primary DNS server should be set to the IP address of the Router’s LAN interface (e.g., the default LAN IP address is 192.168.0.1), and Subnet mask is set to 255.255.255.0. There should be only one DHCP server on the LAN; otherwise, DHCP would not work properly. If there is already a DHCP server on the LAN, disable the DHCP server functionality of the Router.

2.11.4.3. Static DHCP Mappings

Fig. 65. Static DHCP mappings.

IP addresses of servers are often static so that clients could always locate the servers by the static IP addresses. By Static DHCP Mappings, you can ensure that a host will get the same IP address when it requests one from the DHCP server. Therefore, instead of configuring the IP address of an intranet server manually, you can configure the server to obtain an IP address by DHCP and it is always as- signed the same IP address.

42

Image 47

Contents User’s Guide Federal Communication Commission Interference Statement TTE Compliance Statement Table of Contents Page Overview IntroductionIeee 802.11b/g Compliant „ Wireless Operation FeaturesUser Authentication, Authorization, and Accounting Internet Connection Sharing Network Security Management Firmware ToolsPage LED Definition Feature ComparisonSelecting a Power Supply Method First-Time Installation and ConfigurationMounting the IWE3200-H on a wall Mounting the IWE3200-H on a WallConnecting the Managing Computer and the IWE3200-H Preparing for ConfigurationEntering the User Name and Password Configuring the IWE3200-HChanging the TCP/IP Settings of the Managing Computer Home Setup Wizard Selecting an Operational ModeRouter with a DHCP-Based DSL/Cable Connec- tion Setup Wizard Configuring TCP/IP SettingsRouter with a PPPoE-Based DSL/Cable Connec- tion Router with a Multiple DSL/Cable Connections Router with a Static-IP DSL/Cable ConnectionSetup Wizard Configure Ieee 802.11 Set- tings Setup Wizard Dhcp Server SettingsWeb Redirection Configuring User Authentication SettingsTo setup the Local Authentication method Local Authentication SeverPage Usage of control keypad How to Setup the mini-POS Ticket PrinterTo setup the mini-POS Ticket Printer Ieee Configuring Radius SettingsDeploying the IWE3200-H To establish a wireless link to an AP Setting up Client ComputersConfiguring Ieee 802.11-Related Settings Configuring TCP/IP-Related Settings Authentication success Menu Structure Using Web-Based Network ManagementAAA. Authentication, Authorization, and Accounting settings IWE3200-H Save, Save & Restart, and Cancel CommandsHome and Refresh Commands Seeing Status Associated Wireless ClientsAuthenticated Users Session List Account TableManaged LAN Devices Specifying Operational ModeSystem Page Managing Firmware Changing PasswordBacking up and Restoring Configuration Set- tings by Http To upgrade firmware of the access Router by HttpUpgrading Firmware by Tftp To back up configuration of the access Router by HttpTo restore configuration of the access Router by Http TIP To upgrade firmware of the access Router by TftpTo restore configuration of the IWE3200-H by Tftp Backing up and Restoring Configuration Set- tings by TftpTo back up configuration of the access Router by Tftp Address Configuring TCP/IP Related SettingsSetting Time Zone Resetting Configuration to Factory DefaultsRouter with a PPPoE-Based DSL/Cable Con- nection Router with a Static-IP DSL/Cable Connection DNS Proxy DNSRouter with Multiple DSL/Cable Connections To give an internal server a domain name NATStatic DNS Mappings BasicFunctionality To expose preset internal serversDhcp Server Virtual Server MappingsStatic Dhcp Mappings Load Balancing Load Balancing Policy SettingsCommunication Configuring Wireless SettingsZero Client Reconfiguration Wireless Distribution System To enable a WDS link Wireless Distribution System settingsSecurity Page Set the Access control type to exclusive MAC-Address-Based Access ControlTo delete an entry in the access control table Web-redirection mechanism Web RedirectionWeb redirection enabled with authentication Unrestricted Clients Default authentication failure warningTo add a link to the walled garden Walled GardenTo specify a uncontrolled computer by MAC address Radius Robustness Authentication Page Customization Authentication Session ControlTo specify an advertisement link Authentication success page customization settingsDdns Advertisement links settingsTo set a rule for packet filtering Configuring Advanced SettingsFilters and Firewall Packet FiltersURL Filters VlanFirewall To block Http traffic to an unwelcome Web site ManagementUPnP System Log To specify a trap target LAN Device ManagementSnmp To specify a LAN device to manage Example for LAN device managementDefault Settings DNS Proxy AuthenticationLED Definitions Rear PanelTCP/IP Settings Problems Appendix B TroubleshootingIWE3200-H does not respond to ping from the client computer Cannot access the Internet Wireless Settings ProblemsWireless Gateway/AP Browse Other ProblemsIWE3200-H Weight Configuration and ManagementPower Supply Dimensions without antennaIWE500-INJ Power Injector IWE810-POS mini-POS Ticket Printer