Epson IWE3200-H manual IWE500-INJ Power Injector

Page 79

C-2: IWE500-INJ Power Injector

Input Power Requirements

AC Input Voltage

: 90

– 264Vac

AC Frequency

: 47

– 63 Hz

AC Input Current

: 2A at 100Vac, 1A at 240Vac, (-48Vdc)

Power over LAN output Specification

Pin Assignments and Polarity: () 4/5 () 7/8

Output Voltage: Aggregate Power:50W (48Vdc)

 

Mechanical Requirement

 

: 4” x 5.5” x 1.5”

 

Dimensions

 

Weight

: 1.38 Lbs

 

Indicators

 

 

System Indicator

: AC Power (Green)

 

 

 

 

 

Power Active (Red) 0.05 AIo0.8 A

 

Connectors Shielded Rj-45

Over Current Protection (Red, Flash) Io1.0 A

 

 

 

 

 

 

 

 

Environmental Conditions

: 32° to 104° F (0° to 40° C)

 

Operating Temperature

 

Operating Humidity

: Maximum 90% Non-condensing

 

Storage Temperature

: -13° to 185° F (-25° to 85° C)

 

Storage Humidity

: Maximum 95%, Non-condensing

 

Operating Altitude

: -1000 to 10,000 ft. (-304.8 to 3048 m)

 

 

 

 

 

 

Safety Approval

 

 

UL 1950

 

 

 

 

CSA A22.2 No. 950

 

 

EN 60950

 

 

CB

 

 

 

 

 

 

Regulatory Compliance

 

 

CE Compliance

 

 

Electromagnetic Emission and Immunity

A.FCC Part 15 Class B

74

Image 79
Contents User’s Guide Federal Communication Commission Interference Statement TTE Compliance Statement Table of Contents Page Overview IntroductionUser Authentication, Authorization, and Accounting FeaturesIeee 802.11b/g Compliant „ Wireless Operation Internet Connection Sharing Network Security Management Firmware ToolsPage LED Definition Feature ComparisonSelecting a Power Supply Method First-Time Installation and ConfigurationMounting the IWE3200-H on a wall Mounting the IWE3200-H on a WallConnecting the Managing Computer and the IWE3200-H Preparing for ConfigurationChanging the TCP/IP Settings of the Managing Computer Configuring the IWE3200-HEntering the User Name and Password Home Setup Wizard Selecting an Operational ModeRouter with a PPPoE-Based DSL/Cable Connec- tion Setup Wizard Configuring TCP/IP SettingsRouter with a DHCP-Based DSL/Cable Connec- tion Router with a Multiple DSL/Cable Connections Router with a Static-IP DSL/Cable ConnectionSetup Wizard Configure Ieee 802.11 Set- tings Setup Wizard Dhcp Server SettingsWeb Redirection Configuring User Authentication SettingsTo setup the Local Authentication method Local Authentication SeverPage To setup the mini-POS Ticket Printer How to Setup the mini-POS Ticket PrinterUsage of control keypad Ieee Configuring Radius SettingsDeploying the IWE3200-H Configuring Ieee 802.11-Related Settings Setting up Client ComputersTo establish a wireless link to an AP Configuring TCP/IP-Related Settings Authentication success Menu Structure Using Web-Based Network ManagementAAA. Authentication, Authorization, and Accounting settings Home and Refresh Commands Save, Save & Restart, and Cancel CommandsIWE3200-H Authenticated Users Associated Wireless ClientsSeeing Status Session List Account TableSystem Specifying Operational ModeManaged LAN Devices Page Managing Firmware Changing PasswordBacking up and Restoring Configuration Set- tings by Http To upgrade firmware of the access Router by HttpTo restore configuration of the access Router by Http To back up configuration of the access Router by HttpUpgrading Firmware by Tftp TIP To upgrade firmware of the access Router by TftpTo back up configuration of the access Router by Tftp Backing up and Restoring Configuration Set- tings by TftpTo restore configuration of the IWE3200-H by Tftp Address Configuring TCP/IP Related SettingsSetting Time Zone Resetting Configuration to Factory DefaultsRouter with a PPPoE-Based DSL/Cable Con- nection Router with a Static-IP DSL/Cable Connection Router with Multiple DSL/Cable Connections DNSDNS Proxy To give an internal server a domain name NATStatic DNS Mappings BasicFunctionality To expose preset internal serversDhcp Server Virtual Server MappingsStatic Dhcp Mappings Load Balancing Load Balancing Policy SettingsZero Client Reconfiguration Configuring Wireless SettingsCommunication Wireless Distribution System To enable a WDS link Wireless Distribution System settingsSecurity Page Set the Access control type to exclusive MAC-Address-Based Access ControlTo delete an entry in the access control table Web-redirection mechanism Web RedirectionWeb redirection enabled with authentication Unrestricted Clients Default authentication failure warningTo specify a uncontrolled computer by MAC address Walled GardenTo add a link to the walled garden Radius Robustness Authentication Page Customization Authentication Session ControlTo specify an advertisement link Authentication success page customization settingsDdns Advertisement links settingsTo set a rule for packet filtering Configuring Advanced SettingsFilters and Firewall Packet FiltersFirewall VlanURL Filters UPnP ManagementTo block Http traffic to an unwelcome Web site System Log Snmp LAN Device ManagementTo specify a trap target To specify a LAN device to manage Example for LAN device managementDefault Settings DNS Proxy AuthenticationLED Definitions Rear PanelTCP/IP Settings Problems Appendix B TroubleshootingIWE3200-H does not respond to ping from the client computer Cannot access the Internet Wireless Settings ProblemsWireless Gateway/AP Browse Other ProblemsIWE3200-H Weight Configuration and ManagementPower Supply Dimensions without antennaIWE500-INJ Power Injector IWE810-POS mini-POS Ticket Printer