Epson IWE3200-H manual Default Settings

Page 71

Appendix A

A-1: Default Settings

TIP:

Press the Default switch on the housing of a powered-onRouter to reset the configura- tion settings to factory-set values.

Setting Name	Default Value
Global
User Name	root
Password	root
Operational Mode	Gateway with a Static-IP DSL/Cable
	Connection
WAN Interface
Type	DHCP
Changeable MAC Address	Default MAC address of WAN interface
IP Address	192.168.100.1
Subnet Mask	255.255.255.0
Default Gateway	0.0.0.0
Primary DNS Server	0.0.0.0
Secondary DNS Server	0.0.0.0
Host Name	gateway
Domain (DNS suffix)	Not set
PPP
User Name	username
Password	Not set
Telephone Number	Not set
PPPoE
User Name	username
Password	Not set
Service Name	Service name
LAN Interface
Method of obtaining an IP Address	Set manually
IP Address	192.168.0.1
Subnet Mask	255.255.255.0
Default Gateway	0.0.0.0
DHCP Server
Functionality	Enabled
Default Gateway	192.168.0.1
Subnet Mask	255.255.255.0
Primary DNS Server	192.168.0.1
Secondary DNS Server	0.0.0.0
First Allocataeble IP Address	192.168.0.2
Allocateable IP Address Count	20
NAT Server
Functionality	Enabled
Virtual Server Mappings	Disabled
DMZ Host	Not set
Static NAT Mappings	Not set
	66

Image 71

Contents User’s Guide Federal Communication Commission Interference Statement TTE Compliance Statement Table of Contents Page Overview IntroductionIeee 802.11b/g Compliant „ Wireless Operation FeaturesUser Authentication, Authorization, and Accounting Internet Connection Sharing Network Security Management Firmware ToolsPage LED Definition Feature ComparisonSelecting a Power Supply Method First-Time Installation and ConfigurationMounting the IWE3200-H on a wall Mounting the IWE3200-H on a WallConnecting the Managing Computer and the IWE3200-H Preparing for ConfigurationEntering the User Name and Password Configuring the IWE3200-HChanging the TCP/IP Settings of the Managing Computer Home Setup Wizard Selecting an Operational ModeRouter with a DHCP-Based DSL/Cable Connec- tion Setup Wizard Configuring TCP/IP SettingsRouter with a PPPoE-Based DSL/Cable Connec- tion Router with a Multiple DSL/Cable Connections Router with a Static-IP DSL/Cable ConnectionSetup Wizard Configure Ieee 802.11 Set- tings Setup Wizard Dhcp Server SettingsWeb Redirection Configuring User Authentication SettingsTo setup the Local Authentication method Local Authentication SeverPage Usage of control keypad How to Setup the mini-POS Ticket PrinterTo setup the mini-POS Ticket Printer Ieee Configuring Radius SettingsDeploying the IWE3200-H To establish a wireless link to an AP Setting up Client ComputersConfiguring Ieee 802.11-Related Settings Configuring TCP/IP-Related Settings Authentication success Menu Structure Using Web-Based Network ManagementAAA. Authentication, Authorization, and Accounting settings IWE3200-H Save, Save & Restart, and Cancel CommandsHome and Refresh Commands Seeing Status Associated Wireless ClientsAuthenticated Users Session List Account TableManaged LAN Devices Specifying Operational ModeSystem Page Managing Firmware Changing PasswordBacking up and Restoring Configuration Set- tings by Http To upgrade firmware of the access Router by HttpUpgrading Firmware by Tftp To back up configuration of the access Router by HttpTo restore configuration of the access Router by Http TIP To upgrade firmware of the access Router by TftpTo restore configuration of the IWE3200-H by Tftp Backing up and Restoring Configuration Set- tings by TftpTo back up configuration of the access Router by Tftp Address Configuring TCP/IP Related SettingsSetting Time Zone Resetting Configuration to Factory DefaultsRouter with a PPPoE-Based DSL/Cable Con- nection Router with a Static-IP DSL/Cable Connection DNS Proxy DNSRouter with Multiple DSL/Cable Connections To give an internal server a domain name NATStatic DNS Mappings BasicFunctionality To expose preset internal serversDhcp Server Virtual Server MappingsStatic Dhcp Mappings Load Balancing Load Balancing Policy SettingsCommunication Configuring Wireless SettingsZero Client Reconfiguration Wireless Distribution System To enable a WDS link Wireless Distribution System settingsSecurity Page Set the Access control type to exclusive MAC-Address-Based Access ControlTo delete an entry in the access control table Web-redirection mechanism Web RedirectionWeb redirection enabled with authentication Unrestricted Clients Default authentication failure warningTo add a link to the walled garden Walled GardenTo specify a uncontrolled computer by MAC address Radius Robustness Authentication Page Customization Authentication Session ControlTo specify an advertisement link Authentication success page customization settingsDdns Advertisement links settingsTo set a rule for packet filtering Configuring Advanced SettingsFilters and Firewall Packet FiltersURL Filters VlanFirewall To block Http traffic to an unwelcome Web site ManagementUPnP System Log To specify a trap target LAN Device ManagementSnmp To specify a LAN device to manage Example for LAN device managementDefault Settings DNS Proxy AuthenticationLED Definitions Rear PanelTCP/IP Settings Problems Appendix B TroubleshootingIWE3200-H does not respond to ping from the client computer Cannot access the Internet Wireless Settings ProblemsWireless Gateway/AP Browse Other ProblemsIWE3200-H Weight Configuration and ManagementPower Supply Dimensions without antennaIWE500-INJ Power Injector IWE810-POS mini-POS Ticket Printer