Epson manual Configuring the IWE3200-H, Changing the TCP/IP Settings of the Managing Computer

2.3.2.Changing the TCP/IP Settings of the Managing Computer

Use the Windows Network Control Panel Applet to change the TCP/IP settings of the managing computer, so that the IP address of the computer and the IP address of the IWE3200-Hare in the same IP subnet. Set the IP address of the computer to 192.168.0.xxx.

NOTE:

For some versions of Windows, the computer needs to be restarted for the changes of TCP/IP settings to take effect.

2.4. Configuring the IWE3200-H

The IWE3200-His DHCP server enabled by default. After the IP addressing is configured, launch a Web browser on the managing computer. Then, go to “http://192.168.0.1” to log on to the IWE3200-Hfor Web-based management.

TIP:

For maintenance configuration, the IWE3200-Hcan be reached by its host name using a Web browser. For example, if the IWE3200-His named “AP”, you can use the URL “http://AP” to access the Web-based management interface of the IWE3200-H.

2.4.1. Entering the User Name and Password

Before the Home page is shown, you will be prompted to enter the user name and password to gain the right to access the Web-based Network Manager. For first-time configuration, use the default user name “root” and default password “root”, respectively.

Fig. 7. Entering the user name and password.

NOTE:

It is strongly recommended that the password be changed to other value for security rea- sons. (See Section 2.10.2 for more information).

11