Epson IWE3200-H manual Configuring TCP/IP Related Settings, Setting Time Zone, Address

Page 41

example, if the Router’s MAC address is 00-01-02-33-44-55, the configuration backup file should be “000102334455.hex”.

5.On the computer, run a Web browser and click the General, Firmware Tools hyperlink.

6.Within the Configuration Backup/Restore section, specify the IP address of the computer, which acts as a TFTP server. If you don’t know the IP address of the computer, open a Com- mand Prompt, and type IpConfig, then press the Enter key.

7.Trigger the restoring process by clicking Restore. The Router will then download the configura- tion backup file from the TFTP server.

NOTE:

Make sure the file is a valid configuration backup file for the access Router.

2.10.3.5. Resetting Configuration to Factory Defaults

Fig. 54. Configuration reset.

Clicking the Reset button resets the device configuration to factory defaults.

WARNING:

Clicking the Reset button will lose all your current configuration settings.

2.10.4. Setting Time Zone

Fig. 55. Time zone and time server settings.

The IWE3200-Hsupports absolute system time by querying the SNTP (Simple Network Time Pro- tocol) time server specified by the Time server setting. And you should specify the Time zone ac- cording to where you are.

2.11. Configuring TCP/IP Related Settings

2.11.1. Address

The addressing settings depend on the operational mode of the IWE3200-H. Each operational mode requires different addressing settings.

36

Image 41

Contents User’s Guide Federal Communication Commission Interference Statement TTE Compliance Statement Table of Contents Page Overview IntroductionIeee 802.11b/g Compliant „ Wireless Operation FeaturesUser Authentication, Authorization, and Accounting Internet Connection Sharing Network Security Management Firmware ToolsPage LED Definition Feature ComparisonSelecting a Power Supply Method First-Time Installation and ConfigurationMounting the IWE3200-H on a wall Mounting the IWE3200-H on a WallConnecting the Managing Computer and the IWE3200-H Preparing for ConfigurationEntering the User Name and Password Configuring the IWE3200-HChanging the TCP/IP Settings of the Managing Computer Home Setup Wizard Selecting an Operational ModeRouter with a DHCP-Based DSL/Cable Connec- tion Setup Wizard Configuring TCP/IP SettingsRouter with a PPPoE-Based DSL/Cable Connec- tion Router with a Multiple DSL/Cable Connections Router with a Static-IP DSL/Cable ConnectionSetup Wizard Configure Ieee 802.11 Set- tings Setup Wizard Dhcp Server SettingsWeb Redirection Configuring User Authentication SettingsTo setup the Local Authentication method Local Authentication SeverPage Usage of control keypad How to Setup the mini-POS Ticket PrinterTo setup the mini-POS Ticket Printer Ieee Configuring Radius SettingsDeploying the IWE3200-H To establish a wireless link to an AP Setting up Client ComputersConfiguring Ieee 802.11-Related Settings Configuring TCP/IP-Related Settings Authentication success Menu Structure Using Web-Based Network ManagementAAA. Authentication, Authorization, and Accounting settings IWE3200-H Save, Save & Restart, and Cancel CommandsHome and Refresh Commands Seeing Status Associated Wireless ClientsAuthenticated Users Session List Account TableManaged LAN Devices Specifying Operational ModeSystem Page Backing up and Restoring Configuration Set- tings by Http Changing PasswordTo upgrade firmware of the access Router by Http Managing FirmwareUpgrading Firmware by Tftp To back up configuration of the access Router by HttpTo restore configuration of the access Router by Http TIP To upgrade firmware of the access Router by TftpTo restore configuration of the IWE3200-H by Tftp Backing up and Restoring Configuration Set- tings by TftpTo back up configuration of the access Router by Tftp Setting Time Zone Configuring TCP/IP Related SettingsResetting Configuration to Factory Defaults AddressRouter with a PPPoE-Based DSL/Cable Con- nection Router with a Static-IP DSL/Cable Connection DNS Proxy DNSRouter with Multiple DSL/Cable Connections Static DNS Mappings NATBasic To give an internal server a domain nameDhcp Server To expose preset internal serversVirtual Server Mappings FunctionalityStatic Dhcp Mappings Load Balancing Load Balancing Policy SettingsCommunication Configuring Wireless SettingsZero Client Reconfiguration Wireless Distribution System To enable a WDS link Wireless Distribution System settingsSecurity Page Set the Access control type to exclusive MAC-Address-Based Access ControlTo delete an entry in the access control table Web-redirection mechanism Web RedirectionWeb redirection enabled with authentication Unrestricted Clients Default authentication failure warningTo add a link to the walled garden Walled GardenTo specify a uncontrolled computer by MAC address Radius Robustness Authentication Page Customization Authentication Session ControlTo specify an advertisement link Authentication success page customization settingsDdns Advertisement links settingsFilters and Firewall Configuring Advanced SettingsPacket Filters To set a rule for packet filteringURL Filters VlanFirewall To block Http traffic to an unwelcome Web site ManagementUPnP System Log To specify a trap target LAN Device ManagementSnmp To specify a LAN device to manage Example for LAN device managementDefault Settings LED Definitions AuthenticationRear Panel DNS ProxyTCP/IP Settings Problems Appendix B TroubleshootingIWE3200-H does not respond to ping from the client computer Cannot access the Internet Wireless Settings ProblemsWireless Gateway/AP Browse Other ProblemsIWE3200-H Power Supply Configuration and ManagementDimensions without antenna WeightIWE500-INJ Power Injector IWE810-POS mini-POS Ticket Printer