Kodak I3400, I3200 manual Using the rear document exit

Using the rear document exit

Documents that require special handling (i.e., fragile documents, shipping envelopes, etc.) can be output using the rear document exit. This exit provides the straight-through paper path option that allows an exception document to pass through the transport, thus reducing the possibility of a document jam.

To use the rear document exit, lift the rear document exit lever up.

Use the rear document exit when:

•documents are too stiff (e.g., rigid) to make the turn in the transport and are jamming (U9 is being displayed on the operator control panel).

•documents are fragile and you do not want to bend them.

•output stacking order is not important.

•scanning directly into the recycle bin when documents are no longer needed after scanning.

•scanning photographs.

NOTES:

•Be sure to lower the rear document exit lever into it’s original position when finished.

•Be sure that you have adequate clearance behind the scanner to feed the document(s) through when using this option.

•When scanning several documents through the rear document exit, the documents will be output in the reverse scanning order.

3-2 A-61771 September 2012