Kodak I3400, I3200 manual Maintenance, Contents

5 Maintenance

Contents

Cleaning tools and materials	5-2
Opening the scanner cover	5-2
Cleaning procedures	5-3
Cleaning the rollers	5-4
Cleaning the separation roller tires	5-4
Cleaning the feed module tires	5-5
Cleaning the background strip(s)	5-5
Cleaning the imaging guides	5-5
Running a transport cleaning sheet	5-6
Final cleaning steps	5-6
Replacement procedures	5-7
Replacing the feed module or feed module tires	5-7
Replacing the separation roller or separation roller tires	5-9
Replacing the front transport roller	5-10
Replacing the pre-separation pad	5-11
Replacing the background strip(s)	5-11
Supplies and consumables	5-12

This chapter describes the required cleaning and maintenance procedures for the Kodak i3200/i3400 Scanner. The frequency of these procedures will vary with different scanning environments, paper types and image processing requirements. High volumes of scanning will demand more frequent cleaning of the scanner and more frequent replacement of consumables. Years of Kodak’s production scanning experience proves that properly cleaning and maintaining your scanner will result in scanning more paper in less time with less issues. A properly maintained Kodak i3200/i3400 Scanner will provide years of trouble-free operation.

Scanner consumables (tires, pre-separation pads, etc.) and cleaning supplies are available from resellers, web merchants and from the Kodak on-line store (http:/scannerstore.kodak.com). Consumables are sold in kits of various sizes. The kits contain the proper mix of tires, rollers, and pre-separation pads so you can easily replace them at the recommended rate. For example, only replacing the tires and never replacing the separation roller will eventually minimize scanner performance. Replacing the consumables at the recommended frequency will ensure the best performance.

A-61771 September 2012 5-1