Kodak I3400, I3200 manual Replacement procedures, Replacing the feed module or feed module tires

Page 32

Replacement procedures

Replacing the feed module or feed module tires

This section provides procedures for replacing the following parts. Use the list below as a guideline for frequency of replacement.

•Feed module tires and separation roller tires — tire life will vary depending upon paper types, environment and cleanliness. Nominal tire life is approximately 500,000 documents; results will vary. Degradation of feeder performance, multiple feeds, stoppages, etc. indicate a need to change tires.

•Feed module and separation roller — it is recommended that you install a new feed module and separation roller every 4th tire change. Install a new feed module and separation roller at the same time.

•Pre-separation pad — it is recommended that you change the pre- separation pad at least as often as you change the feed module/separation roller tires.

•Front transport roller — depending on paper types, environment and cleanliness, roller life is approximately 1,000,000 documents; results will vary.

1.Open the scanner cover.

2.Push the feed module release lever to the right and release the feed module.

3.If you are just replacing the feed module, go to Step 10. If you are replacing the tires, proceed with Step 4.

4.With one hand, press the locking tabs (one on each side) while holding the lower housing with the other hand. Pull the upper housing up and away from the rollers.

5. Remove both core assemblies.

A-61771 September 2012

5-7

Image 32

Contents Page Safety User PrecautionsEMC statements Environmental informationEuropean Union Acoustic emission Page Contents OverviewAccessories What’s in the box Scanner components Front viewPage Optional Printer Accessory Printer access view Inside view Rear view Installation/First Scan Contents SetupConnect scanner Scanner ready ScanningGetting your scanner ready Getting your documents ready to scan Power saver mode and turning the scanner off Scanner Adjustments Contents Adjusting the input trayUsing the rear document exit Selecting your scanning application Document Printing Characteristic Description Maximum lines Maximum characters Print locations horizontalPrint locations vertical Print orientationInstalling/replacing the ink cartridge Load position Printing positionPage Changing print positions Problem solving Maintenance Cleaning tools and materials Opening the scanner cover Kodak Digital Science Roller Cleaning PadsPage Cleaning the rollers Cleaning the separation roller tires Guides Cleaning the feed module tiresCleaning the imaging Running a transport Cleaning sheetFinal cleaning steps Replacement procedures Replacing the feed module or feed module tiresIMPORTANTDo not overstretch the tire it may tear Replacing the separation roller or separation roller tires Replacing the front transport roller Page Supplies/Consumables CAT No Accessories CAT NoAccessories To remove a document jam TroubleshootingProblem Possible Solution Click StartSettingsControl PanelAdministrative ToolsComputer Management to display the ComputerProblem Possible Solution Codes Steady red then flashing green scanner is powering upSegment LED indicator Explanation Display Appendix a Specifications Appendix B Warranty US and Canada only Limited Warranty for Kodak ScannersWarranty exclusions Installation Warning and DisclaimerHow to obtain Limited Warranty service Return procedureWarranty Service descriptions Packaging and shipping guidelinesImportant restrictions On-site serviceDepot service Contacting Kodak