
COMMAND CENTER Pages
Basic > Defaults > Reset
This page allows you to restart the machine in order to make all settings in the machine valid. It is also possible to select to have all settings returned to their factory default values.
Item | Description |
|
|
Restart entire | Clicking Restart restarts this machine restarts. |
device | After you have changed network or security settings, you |
| must restart this machine. |
|
|
Reset entire | When clicking the Reset button, the machine returns to the |
device to | factory default settings. However, the document box, |
factory default | address book, user information, logs, and certificates are not |
| deleted. |
|
|
Basic > Defaults > Device Defaults
This page allows you to change the language that is used in the display, as well as to turn the Auto Sleep Mode On or Off.
Item | Description |
|
|
Operation Panel | You can select the language of the messages on the display |
Language | by following the procedure given below. The following |
| languages are available for selection in the drop down list: |
| English, Français, Deutsch, Italiano, Nederlands, Español, |
| Português, and the downloaded languages |
| You can optionally download messages in other languages. |
| Contact your dealer for information. |
| Some models may require restarting after configuration. |
|
|
Sleep Timer | Specifies the time from 1 to 240 minutes after which the |
| system enters the auto sleep mode. |
| You can turn the sleep timer On or Off as follows. The |
| default setting is On. |
| 1. Click Advanced on the right hand side of the drop down |
| list. |
| 2. Turn the sleep mode On or Off. |
| 3. Click Submit. |
|
|
Low Power | Specifies the time from 1 to 240 minutes after which the |
Timer | system enters the low power mode, where it reduces the |
| power consumption. |
|
|
Override A4/ | Specifies whether or not the A4 and Letter size paper should |
Letter | be interchangeable.When turned On, for example, if the A4 |
| paper is not in the tray, the Letter size paper will be selected |
| for printing.When turned Off, the Letter size paper will not be |
| used in place of the A4 paper, when A4 is selected for |
| printing but the A4 tray is empty. |
|
|
Auto Error Clear | Specifies whether or not to clear errors automatically when |
| they occur. The default setting is On. |
|
|
Error Clear Timer | Specifies the time between 5 and 495 seconds after which |
| errors are cleared automatically. |
|
|
Operation Guide | 9 |