|
| COMMAND CENTER Pages | |
|
|
|
|
|
|
|
|
| Item | Description | |
|
|
|
|
| sysName | The | |
|
| of the printing system. | |
|
|
|
|
| sysLocation | The | |
|
| information of the printing system. | |
|
|
|
|
| HP Web | Turns HP Web Jetadmin Compatibility On or Off. After you | |
| Jetadmin | have changed this setting, you must restart this machine. | |
| Compatibility |
|
|
Authentication Traps
Specifies whether to use authentication traps. If enabled, an SNMP trap is generated when an attempt to read or write is made using an incorrect community name. The trap is sent to the configured trap address.
Trap | The SNMP trap community name to be used when the |
Community | printing system generates a trap. |
|
|
Trap IP Address | Enter the IPv4 address that receives traps. Select On to |
(IPv4) | enable trap receiving. |
|
|
Trap IP Address | Enter the IPv6 address that receives traps. Select On to |
(IPv6) | enable trap receiving. |
|
|
Trap IPX Address | Enter the IPX address that receives traps. Select On to |
| enable trap receiving. |
|
|
Selected Errors | Select the events which will cause a trap to be generated |
| from Add Paper, Low Toner, Add Toner, Cover Open, |
| Paper Jam, and All Other Errors. |
|
|
Advanced > Management > SNMP > SNMPv3
The table below provides a summary of the items displayed on the SNMPv3 page.After you have changed this setting, you must restart this machine. For the restarting procedure, refer to Basic > Defaults > Reset on page 9.
Item | Description |
|
|
SNMPv3 | Sets whether to use the SNMPv3 protocol. Set On to use it. |
|
|
Authentication | Sets whether to authenticate the user in SNMP communication. |
|
|
Hash | Selects the hash algorithm. This item is displayed when the |
| Authentication is On. |
|
|
Privacy | Sets whether to encrypt the communicated data in SNMP |
| communication. |
|
|
Encryption | Selects the encryption algorithm. This item is displayed when |
| Privacy is On. |
|
|
User Name | Enter the name of the |
|
|
Password | Enter the password for the |
|
|
User Name | Enter the name of the read/write user. |
|
|
Operation Guide | 43 |