COMMAND CENTER Pages
Item | Description |
|
|
Remote Printer | Enables or disables Remote Printer Mode. |
Mode |
|
|
|
Print Server | Enter the name of the printer server that the remote printer |
Name | belongs to. |
|
|
Job Timeout | Enter the timeout in seconds. |
|
|
Advanced > Protocols > IPP
Using IPP (Internet Printing Protocol) or IPP over SSL, you can output to the printing system over the Internet or an intranet.
Item | Description |
|
|
IPP | Enables or disables IPP. |
|
|
IPP Port | Sets the port number to be used by IPP. In normal situations, |
Number | set this port number to 631. |
|
|
IPP over SSL | Enables or disables the IPP over SSL protocol. |
|
|
IPP over SSL | Sets the port number to be used by IPP over SSL. In normal |
Port Number | situations, set this port number to 443. |
|
|
Advanced > Protocols > AppleTalk
You can print from Macintosh computers using the AppleTalk protocol.
The printing system network component supports Mac OS of various versions (System Requirements on page 1) and is compatible with LaserWriter driver version 8.x.
To set up the Ethernet interface to communicate via AppleTalk, enables AppleTalk protocol operation on the printing system.
Item | Description |
|
|
AppleTalk | Enables or disables AppleTalk protocol. |
|
|
Printer Name | Specifies the name of the printing system in the AppleTalk |
| network. |
|
|
Zone Name | Specifies the name of the AppleTalk zone (network). An |
| asterisk (*) means the default zone. |
|
|
38 | KYOCERA COMMAND CENTER |