Kyocera FS-1010 manual Maintenance Messages

Indicators

3.3.1Maintenance Messages

The following table lists error messages that can be dealt with by the user.

Read the explanations carefully.

Indicator	KM-NET for Clients display	Corrective Action
	Add paper <paper source>	The paper has run out. Add paper to the
		paper cassette (1 or 2) or MP tray.
		The paper source is displayed in the KM-NET for
		Clients.
		The paper cassette is not closed securely.
		Close the paper cassette properly.
	Close	The top or front cover is open.
	top cover	Close the cover properly.

Load Cassette #	There is data for printing that matches with a
<paper size><paper type>	paper cassette setting (paper size, paper type),
	but there is no paper in the paper cassette.
	Set paper of the size and type specified in the print
	data into the cassette (1 or 2) to resume printing.
	When you want to feed from a other paper source,
	press the	key to switch the paper source. The
	printer prints on the paper size and type set in that
	particular paper source.

Load MP tray	The cassette paper size and data paper size
<paper size><paper type>	are not the same.
	The printer feeds from the MP Tray when the page
	in the paper cassette is a different size and type
	than that specified in the print data. Set paper of
	the size and type specified in the print data into the
	MP tray, then press the		key to resume printing.
	When you want to feed from a source other than the
	MP tray, make sure there is no paper in the MP
	tray, then press the		key to switch the paper
	source. The printer prints on the paper size set in
	that particular paper source.
		Feeding the paper having a paper size
		which does not match the current paper
		size from the MP tray can cause paper jam.

Paper jam	Open the printer and clear the paper jam.
############	The location of the paper jam is also indicated in
	place of #’s.
	For details on how to clear paper jams, see section
	3.4 Correcting a Paper Jam on page 3-14.
	(Continued on next page)

3-6