Display Setup - continued
7.Connect all cables to the appropriate connectors (Figure 8). Using the USB cable, connect the B type connector to the USB upstream port on the right side of the monitor and the A type con- nector to the downstream port on the computer. If you can use the cord from the USB device, use one of the downstream ports on the side of the monitor. (Figure 9). USB cable is used with WNX models only.
VGA
* NEC optional product attachment.
Do not use this connector unless specified.
Figure 8
(Pictured: LCD2470WNX)
Figure 9
(Pictured: LCD2470WNX)
8.Place the connector cover back on the monitor (Figure 10)
9.Place the attached cables into the specific hooks indicated, mak- ing sure cables are resting fl at against stand (Figure 11).
10.Pivot the screen back to the original position. The tilt and height of the monitor can be adjusted to user’s preference (Figure 12).
Figure 10 | Figure 11 |
(Pictured: LCD2470WNX) | (Pictured: LCD2470WNX) |
Figure 12
(Pictured: LCD2470WNX)
5