NEC LCD2470WNX, LCD2470WVX user manual Power Button

Display Setup - continued

11.Hold all cables firmly against the stand. Place the cable cover back onto the stand (Figure 13).

12.Connect the power cord to the power outlet (Figure 14). NOTE: If using this monitor at AC125-240V, please refer to Recommended Use section of this manual for proper selection of power cord.

13.Turn on the monitor using the front power button and turn on the computer.

14.Analog input only: No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further adjustments, use the following OSD® controls:

• Auto Adjust Contrast • Auto Adjust

Refer to the Controls section of this User ’s Manual for a full description of these OSD controls.

NOTE: For download information on the Windows® INF file visit www.necdisplay.com.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Figure 13

Figure 14

Power Button

6