NEC LCD17V Quick Start, To attach the Base to the LCD Stand, Turn off the power to your computer

Page 5

Quick Start

To attach the Base to the LCD Stand:

1.Insert the front of the LCD Stand into the holes in the front of the Base (Figure 1).

2.Attach the Base to the Stand. The locking tab on the Base should fit into the hole on the back of the Stand.

3.Attach the Cable Holder onto the Base (Figure 2). Insert the hooks on the Cable Holder into the holes at the back of the Stand and slide the Cable Holder downward into place.

Figure 1

Stand
Locking Tab	Front Base	Figure 2
Locking Tab

To attach the LCD monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the MAC: Connect the Macintosh cable adapter to the computer, then attach the

15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure A.2). Tighten all screws.

NOTE: To obtain the Macintosh cable adapter, call NEC Display Solutions of America, Inc. at (800) 632-4662.

3.Connect one end of the power cord to the LCD and the other end to the power outlet. Place the video signal cable and power cord between the cable holder (Figure B.1).

NOTE: Adjust the position of cables between the holder to avoid damage.

NOTE: If you use this monitor at AC125-240V, please refer to Recommended Use section of this manual for proper selection of power cord.

4.Turn on the monitor with the front power button and the computer. (Figure C.1)

5.No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further adjustments, use the following OSM® controls:

• Auto Adjust Contrast • Auto Adjust

Refer to the Controls section of this User’s Manual for a full description of these OSM controls.

NOTE: For download information on the Windows® 95/98/Me/2000/XP INF file for your monitor, refer to the References section of this User’s Manual.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Image 5

Contents LCD17V/19V Informations du fabricant relatives au IndexFCC Information Canadian Department of Communications Compliance StatementContents Auto Adjust Contrast Auto Adjust Turn off the power to your computerQuick Start To attach the Base to the LCD StandFigure A.1 Remove Monitor Stand for Mounting TiltRemoving the Base Connecting a Flexible ArmSpecifications Basic key function ControlsOSM structure ButtonAdjusts the image brightness in relation to the background Adjusts the overall image and background screen brightnessAdjusts the image displayed for non-standard video inputs Increase or decreases Red. The change will appear on screenIndicates the model and serial numbers of your monitor Selecting Exit allows you exit OSM menu/sub menuOSM control menus are available in eight languages Recommended Use Safety Precautions and MaintenanceErgonomics Get regular eye checkupsMonitor Specifications SpecificationsLCD19V Features No picture TroubleshootingReferences NEC Monitor Customer Service & SupportLimited Warranty TCO’03 Manufacturer’s Recycling and Energy Information Off ModeMode LED ColorDisposing of your old NEC Products Declaration of the ManufacturerWithin the European Union Outside the European UnionInformations FCC AvertissementLa boîte* de votre nouveau moniteur NEC LCD contient ContenuCordon d’alimentation Support de câble Manuel de l’utilisateurPour attacher la base au support LCD Mise en marche rapideAdaptateur Macintosh Non fourni Mise en marche rapide suiteAttrapez des deux mains l’écran du moniteur par InclinerEnlever le support du moniteur pour le montage Fiche Technique Enlever la BaseConnexion d’un bras souple Fonction de la touche de base CommandesStructure OSM BoutonRègle la luminosité de l’image par rapport à l’arrière-plan Commandes suiteLa sélection de Outil permet d’accéder au sous-menu Les menus de contrôle OSM sont disponibles en huit languesLe numéro du modèle et le numéro de série y sont indigués Consignes de sécurité et d’entretien Usage recommandéUtiliser un support de document placé près de l’écran Usage recommandé suiteRemarques Fiche techniqueCaractér Techn Du moniteur Fiche technique suite Fonctions Pas d’image DépannageRéférences Garantie limitée Félicitations Couleur DEL Mode ArrêtAu sein de l’Union Européenne Déclaration du fabricantElimination des anciens produits NEC Déclaration DE Conformité Page Información FCC AdvertenciaLa caja del monitor NEC LCD* debe contener lo siguiente ContenidosPara conectar la base al soporte del LCD Inicio rápidoNo incluido Inicio rápido -continuaciónCómo quitar el soporte del monitor para el montaje InclinaciónCómo conectar un brazo flexible Cómo quitar la baseEspecificaciones Nota Siempre quite la base cuando envíe el LCDFunciones básicas de las teclas ControlesEstructura OSM BotónAl seleccionar HERRAMIENTA, puede tener acceso al submenú Ajusta el brillo de imagen en relación con el fondoIndica el modelo y los números de serie de su monitor Si selecciona SALIDA, puede salir del menú o submenú OSMLos menús de control OSM están disponibles en ocho idiomas Precauciones de seguridad y mantenimiento Uso recomendadoPersistencia de la imagen Uso recomendado -continuaciónErgonomía Notas EspecificacionesEspecificaciones Del monitor Especificaciones -continuación Características Sin imagen Solución de problemasReferencias Garantía limitada TCO ‘03 Modo Información del fabricante sobre reciclado y energíaColor del LED Aprox WCómo deshacerse de sus productos NEC antiguos Declaración del fabricanteDentro de la Unión Europea Fuera de la Unión EuropeaDeclaración DE Conformidad Page Declaration of Conformity