Lexmark 510 setup guide Adjusting duplex margins

Page 26

Adjusting duplex margins

Adjusting duplex margins ensures your margins are consistent when two-sided printing is selected.

1 Load plain paper in the standard tray.

2 From the printer operator panel, press Menu until you see Setup Menu, and then press Select.

3 Press Menu until you see Left Margin, and then press Select.

4 Press Menu until you see Duplex, and then press Select.

5 Press Go.

Two pages print.

6 Follow the instructions on the printed pages to determine the left margin value you need.

7 Repeat steps 1–4, press Menu until you see the left margin value you need, and then press Select.

Set up the optional duplex unit

21

Image 26

Contents C510 Edition December Contents Load paper Using the publications CD Base Model and Options IntroductionAbout the printer IntroductionOther sources of information Publications CD Information pagesQuick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Install printer supplies Install printer suppliesInstalling toner cartridges Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPrepare the printer Prepare the printerPositioning the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Attaching the optional duplex unit Set up the optional Duplex unitSet up the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attach cables Attach cablesAttaching a local cable Parallel Attaching a network cable EthernetTurning your printer on What do I do next?Install drivers for local printing Install drivers for local printingWindows \drivers\win2000\Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh Macintosh 8.6-9.0 Open Apple LaserWriterUNIX/Linux Install drivers for local printing Verify printer setup Verify printer setupPrinting a menu settings Click Quick Reference Printing a network setupPrinting Quick Reference information Verify printer setup Assigning a printer IP address Configure for TCP/IPConfigure for TCP/IP Verifying IP settingsConfiguring for Pull Printing RunSupported printer drivers Install drivers for network printingInstall drivers for network printing Supported network printer portsClick Install Printer and Software Printing configuration Operating system Go toShared Name text box Settings PrintersSharing Install the printer driver or subset on network clients Using the point and print methodClick Network Print Server Using the peer-to-peer methodClick Start Settings Printers Choose Printing Change Setup Mac OSClick Applications TextEdit Click Mac OS X EnglishClick Applications Utilities Print Center Click Add Printer NetWare Using the publications Viewing the CD contentsUsing the publications CD Warranty service Statement of Limited WarrantyWarranty Lexmark International, Inc., Lexington, KYAdditional rights Extent of warrantyLimitation of liability 20K1030 K0125