Lexmark 510 setup guide Securing the drawer to the printer

Page 18

Securing the drawer to the printer	If you have an optional drawer, secure it
	to the printer.
	1 Align one bracket with the hole on
	the right side of the printer as
	shown. Press the bracket flat
	against the printer, and then
	tighten the thumbscrew.

Bracket

Tighten thumbscrew

2 Starting at the front of the printer, push the right side cover onto the printer, fitting each slot on the cover over its corresponding tab on the optional drawer, to cover the gap between the printer and the optional drawer.

Note the side cover orientation. The side cover is flat on the bottom.

Prepare the printer

13

Image 18

Contents C510 Edition December Contents Load paper Using the publications CD Base Model and Options IntroductionAbout the printer IntroductionOther sources of information Publications CD Information pagesQuick Reference sheet Drivers CD Lexmark Web site Getting ready for setup Unpack the printerUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Install printer supplies Installing toner cartridgesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPrepare the printer Positioning the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional Duplex unit Set up the optional duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attach cables Attaching a local cableAttach cables Parallel Attaching a network cable EthernetTurning your printer on What do I do next?Install drivers for local printing Install drivers for local printingWindows \drivers\win2000\Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh Macintosh 8.6-9.0 Open Apple LaserWriterUNIX/Linux Install drivers for local printing Verify printer setup Printing a menu settingsVerify printer setup Printing a network setup Printing Quick Reference informationClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address Verifying IP settingsConfiguring for Pull Printing RunSupported printer drivers Install drivers for network printingInstall drivers for network printing Supported network printer portsClick Install Printer and Software Printing configuration Operating system Go toSettings Printers SharingShared Name text box Install the printer driver or subset on network clients Using the point and print methodUsing the peer-to-peer method Click Start Settings PrintersClick Network Print Server Choose Printing Change Setup Mac OSClick Mac OS X English Click Applications Utilities Print Center Click Add PrinterClick Applications TextEdit NetWare Using the publications Viewing the CD contentsUsing the publications CD Warranty service Statement of Limited WarrantyWarranty Lexmark International, Inc., Lexington, KYExtent of warranty Limitation of liabilityAdditional rights 20K1030 K0125