Note: When you add or remove these options:
Printing a network setup page
Note: If an optional MarkNet™ print server is installed, you may see
Print Net1 Setup (or Print Net2 Setup).
Printing Quick Reference information
If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the option. See Step 6: “Install memory, firmware, or option cards” on page 22 for more information.
5 Verify the amount of memory installed is correctly listed under “Printer Information.”
6 Verify that the paper trays are configured for the sizes and types of paper you loaded.
If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that helps you configure for network printing.
Save the network setup page after it prints. You will use it in the later steps.
1
2 Press Menu until you see UTILITIES MENU, and then press Select.
3 Press Menu until you see Print Net Setup, and then press Select to print the page.
4 Check the first section on the network setup page and confirm that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may not be active or your network cable may be malfunctioning. Consult your network administrator for a solution. Afterwards, print another network setup page to verify connection to your network.
Information about using the printer and clearing jams is included on the publications CD that shipped with your printer documentation.
We recommend you print this information and store it in a convenient location near the printer.
To print Quick Reference information stored on the CD:
1 Launch the CD.
2 Click Quick Reference.
Verify printer setup
45