Lexmark 510 setup guide Adjusting tray 2 margins

Page 21

Adjusting tray 2 margins

Adjusting tray 2 margins ensures your margins are consistent when tray linking is enabled.

1

Load plain paper in both trays.

2

From the printer operator panel,

 

press Menu until you see Setup

 

Menu, and then press Select.

3

Press Menu until you see Left

 

Margin, and then press Select.

4

Press Menu until you see Tray 2,

 

and then press Select.

5

Press Go.

 

Two pages print.

6

Follow the instructions on the

 

printed pages to determine the left

 

margin value you need.

7

Repeat steps 1–4, press Menu

 

until you see the left margin value

 

you need, and then press Select.

Prepare the printer

16

Image 21
Contents C510 Edition December Contents Load paper Using the publications CD About the printer IntroductionBase Model and Options IntroductionPublications CD Information pages Other sources of informationQuick Reference sheet Drivers CD Lexmark Web site Getting ready for setup Unpack the printerUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Install printer supplies Installing toner cartridgesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPrepare the printer Positioning the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional Duplex unit Set up the optional duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attach cables Attaching a local cableAttach cables Parallel Ethernet Attaching a network cableWhat do I do next? Turning your printer onInstall drivers for local printing Install drivers for local printing\drivers\win2000\ WindowsSelect Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh 8.6-9.0 Open Apple LaserWriter MacintoshUNIX/Linux Install drivers for local printing Verify printer setup Printing a menu settingsVerify printer setup Printing a network setup Printing Quick Reference informationClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address Configuring for Pull Printing IP settingsVerifying RunInstall drivers for network printing Install drivers for network printingSupported printer drivers Supported network printer portsPrinting configuration Operating system Go to Click Install Printer and SoftwareSettings Printers SharingShared Name text box Using the point and print method Install the printer driver or subset on network clientsUsing the peer-to-peer method Click Start Settings PrintersClick Network Print Server Mac OS Choose Printing Change SetupClick Mac OS X English Click Applications Utilities Print Center Click Add PrinterClick Applications TextEdit NetWare Viewing the CD contents Using the publicationsUsing the publications CD Warranty Statement of Limited WarrantyWarranty service Lexmark International, Inc., Lexington, KYExtent of warranty Limitation of liabilityAdditional rights 20K1030 K0125