Lexmark 510 setup guide Reinstalling the system board

Page 32

Reinstalling the system board

Follow the instructions below to reinstall the system board.

1 Orient the system board as shown and align it with the tracks in the printer slot.

2 Push the system board firmly and evenly into the printer. Make sure the system board is pushed completely into the printer slot.

3 Reattach the four screws to the corners of the system board.

Install memory, firmware, or option cards

27

Image 32
Contents C510 Edition December Contents Load paper Using the publications CD Introduction About the printerBase Model and Options IntroductionOther sources of information Publications CD Information pagesQuick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Install printer supplies Install printer suppliesInstalling toner cartridges Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPrepare the printer Prepare the printerPositioning the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Attaching the optional duplex unit Set up the optional Duplex unitSet up the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attach cables Attach cablesAttaching a local cable Parallel Attaching a network cable EthernetTurning your printer on What do I do next?Install drivers for local printing Install drivers for local printingWindows \drivers\win2000\Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh Macintosh 8.6-9.0 Open Apple LaserWriterUNIX/Linux Install drivers for local printing Verify printer setup Verify printer setupPrinting a menu settings Click Quick Reference Printing a network setupPrinting Quick Reference information Verify printer setup Assigning a printer IP address Configure for TCP/IPConfigure for TCP/IP IP settings Configuring for Pull PrintingVerifying RunInstall drivers for network printing Install drivers for network printingSupported printer drivers Supported network printer portsClick Install Printer and Software Printing configuration Operating system Go toShared Name text box Settings PrintersSharing Install the printer driver or subset on network clients Using the point and print methodClick Network Print Server Using the peer-to-peer methodClick Start Settings Printers Choose Printing Change Setup Mac OSClick Applications TextEdit Click Mac OS X EnglishClick Applications Utilities Print Center Click Add Printer NetWare Using the publications Viewing the CD contentsUsing the publications CD Statement of Limited Warranty WarrantyWarranty service Lexmark International, Inc., Lexington, KYAdditional rights Extent of warrantyLimitation of liability 20K1030 K0125