Lexmark 510 setup guide Using Windows 98 with USB or parallel cable

13 Select Yes to print a test page, and then click Finish. All the necessary files are installed on your computer.

14 After the test page prints, click Yes to close the message window.

Install drivers for local printing

39

After the printer driver is found, click Next.

Click OK.

10

11

12 Use the default printer name or type a unique name for your printer, and then click Next.

Select to Specify a location.

Browse to the location of the printer driver on the drivers CD:

D:\Drivers\WIN_9X\english

8

9

Click Next.

After the USB port driver is installed, click Finish.

After the wizard finds the USB port driver, click Next.

Select only

CD-ROM drive, and then click Next.

3

4

5

6

7 Select Search for the best driver (recommended), and then click Next.

2 Select Search for the best driver for your device (recommended), and then click Next.

Next. If the CD auto

1 Insert the drivers CD, and then click launches, exit the CD.

7 Use the default printer name or type a unique name for your printer, and then click Next.

8 Click Yes (recommended), and then click Finish to print a test page.

9 After the test page prints, click Yes to close the window.

10 Click Finish to complete the installation and close the wizard. You are now ready to print.

You must install both a USB port driver and an enhanced custom print driver.

When the Add New Hardware Wizard screen appears:

Using Windows 98 with USB or parallel cable

Note: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions.