Lexmark 510 setup guide Verify printer setup, Printing a menu settings

Page 49

Make sure the printer is on.

Step 10: Verify printer setup

Printing a menu settings page

Note: For more information about using the printer operator panel and changing menu settings, refer to the publications CD.

The Menu Settings page lists all the options you installed. If a feature or an option is not listed, check your installation. The Network Setup page provides information that is needed if you are attaching your printer to a network.

This is also a good time to print Quick Reference and Clearing Jams information. See ”Printing Quick Reference information” on page 45.

Print a menu settings page to review the default printer settings and to verify that printer options are installed correctly.

1

2 Press Menu until you see UTILITIES MENU, and then press Select.

3 Press Menu until you see Print Menus, and then press Select to print the page. The message Printing Menus appears on the display.

4 Verify that the options you installed are correctly listed under “Installed Features.”

UTILITIES MENU

1 Menu 2 Select 3 Return 4

Go 5 Stop 6

Verify printer setup

44

Image 49

Contents C510 Edition December Contents Load paper Using the publications CD About the printer IntroductionBase Model and Options IntroductionPublications CD Information pages Other sources of informationQuick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Installing toner cartridges Install printer suppliesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPositioning the printer Prepare the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional duplex unit Set up the optional Duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attaching a local cable Attach cablesAttach cables Parallel Ethernet Attaching a network cableWhat do I do next? Turning your printer onInstall drivers for local printing Install drivers for local printing\drivers\win2000\ WindowsSelect Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh 8.6-9.0 Open Apple LaserWriter MacintoshUNIX/Linux Install drivers for local printing Printing a menu settings Verify printer setupVerify printer setup Printing Quick Reference information Printing a network setupClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address Configuring for Pull Printing IP settingsVerifying RunInstall drivers for network printing Install drivers for network printingSupported printer drivers Supported network printer portsPrinting configuration Operating system Go to Click Install Printer and SoftwareSharing Settings PrintersShared Name text box Using the point and print method Install the printer driver or subset on network clientsClick Start Settings Printers Using the peer-to-peer methodClick Network Print Server Mac OS Choose Printing Change SetupClick Applications Utilities Print Center Click Add Printer Click Mac OS X EnglishClick Applications TextEdit NetWare Viewing the CD contents Using the publicationsUsing the publications CD Warranty Statement of Limited WarrantyWarranty service Lexmark International, Inc., Lexington, KYLimitation of liability Extent of warrantyAdditional rights 20K1030 K0125