Lexmark 510 setup guide Removing the system board

Page 28

Removing the system board

Warning: Electronic components can be damaged by rough handling or static electricity. Touch something metal on the printer before you touch any card.

Handles

Note: The system board may be tightly seated in the printer. You may need to pull firmly on the handles.

Follow the instructions in this section to remove the printer system board.

1 Remove the four screws at the corners of the system board.

2 Slide the system board straight out of the printer.

Install memory, firmware, or option cards

23

Image 28

Contents C510 Edition December Contents Load paper Using the publications CD Introduction About the printerBase Model and Options IntroductionOther sources of information Publications CD Information pagesQuick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Installing toner cartridges Install printer suppliesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPositioning the printer Prepare the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional duplex unit Set up the optional Duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attaching a local cable Attach cablesAttach cables Parallel Attaching a network cable EthernetTurning your printer on What do I do next?Install drivers for local printing Install drivers for local printingWindows \drivers\win2000\Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh Macintosh 8.6-9.0 Open Apple LaserWriterUNIX/Linux Install drivers for local printing Printing a menu settings Verify printer setupVerify printer setup Printing Quick Reference information Printing a network setupClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address IP settings Configuring for Pull PrintingVerifying RunInstall drivers for network printing Install drivers for network printingSupported printer drivers Supported network printer portsClick Install Printer and Software Printing configuration Operating system Go toSharing Settings PrintersShared Name text box Install the printer driver or subset on network clients Using the point and print methodClick Start Settings Printers Using the peer-to-peer methodClick Network Print Server Choose Printing Change Setup Mac OSClick Applications Utilities Print Center Click Add Printer Click Mac OS X EnglishClick Applications TextEdit NetWare Using the publications Viewing the CD contentsUsing the publications CD Statement of Limited Warranty WarrantyWarranty service Lexmark International, Inc., Lexington, KYLimitation of liability Extent of warrantyAdditional rights 20K1030 K0125