Lexmark 90T7110 manual Understanding the parts of the printer, Use

About your printer 12

26Extend and flip out the paper stop.

2

1

27From the printer control panel, press to print an alignment page.

Notes:

•The alignment page prints.

•Do not remove the page until printing is finished. The alignment page may take a while to print.

•Streaks on the alignment page are normal and not an indication of a problem.

•The alignment page that prints may differ from the one shown.

•Recycle the alignment page.

Understanding the parts of the printer

12

3 4

5

6

			7
	11
		10	8
		9
	Use the	To
1	Scanner cover	Access the scanner glass.
2	Scanner glass	Scan, copy or fax photos and documents.
3	Automatic Document	Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents.
	Feeder (ADF)
4	ADF paper guide	Keep paper straight when feeding into the ADF.
5	ADF tray	Load original documents into the ADF. This is recommended for scanning,
		copying, or faxing multiple-page documents.
		Note: Do not load postcards, photos, small items, or thin media (such
		as magazine clippings) into the ADF. Place these items on the scanner
		glass.
6	ADF output tray	Hold documents as they exit from the ADF.
7	PictBridge and USB port	Connect a PictBridge‑enabled digital camera or a flash drive to the
		printer.
8	Printer control panel	Operate the printer.
9	Paper tray	Load paper.
10	Paper stop	Catch the paper as it exits.
11	Paper exit tray	Hold paper as it exits.