Emerson 710NPBA manual Relay

UM581127000	User Instructions
Issue AB, March 22, 2012	Spec. No. 581127000 (Model 710NPBA)

to ensure that it cannot be pulled out of the terminal block. Repeat for each wire to be reconnected.

13)Remove the grounding wrist strap.

14)Close the distribution cabinet’s front door. Turn the latch clockwise to secure the door.

15)Enable the external alarms, or notify appropriate personnel that this procedure is finished.

16)Ensure that there are no local or remote alarms active on the system.

TEMPEX	PROBE2	TEMPEX PROBRE1	Connector ACU+to
IB2 Board Assembly

J12 J11 J2

					+
	Blocks	-			2 1
		J3	31		3
					4 2
	Terminal	J4	13 5		6
					6
					2 4
					4 5
	Input		1 5		6
					8
					7
					2
	Digital				4
J10		J5	5 3		6
		NC		NC	2
Relay Output Terminal Blocks	J9 J8 J7 J6 NO 7C NC NO 5C NC NO 3C NC NO 1C *		5 3 1 5 3 1 5 3 1 5 3 1	NO C NC NO C NC NO C NC NO C	6 4 2 6 4 2 6 4 2 6 4 8 6 4 2	RELAY

J3-J9:

Wire Size Capacity: 16-26 AWG.

Recommended Torque: 2.2 in-lbs.

Figure 4-10

IB2 (ACU+ Interface Board) Connector Locations

IB2 Board (Top View)

SW1

J1

Page 34 Chapter 4. Troubleshooting and Repair

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.