UM581127000 | User Instructions |
Issue AB, March 22, 2012 | Spec. No. 581127000 (Model 710NPBA) |
|
|
| STATIC WARNING |
The printed circuit cards used in this equipment contain static sensitive components. The warnings listed below must be observed to prevent damage to these components. Disregarding any of these warnings may result in personal injury or damage to the equipment.
1.Strictly adhere to the procedures provided in this document.
2.Before touching any static sensitive component or printed circuit card containing such a component, discharge all static electricity from yourself by wearing a wrist strap grounded through a one megohm resistor. Some wrist straps, such as Emerson Network Power Part Number 631810600, have a
3.Do not touch the traces or components on a printed circuit card containing static sensitive components. Handle the printed circuit card only by the edges that do not have connector pads.
4.After removing a printed circuit card containing a static sensitive component, place the printed circuit card only on conductive or
5.Store and ship static sensitive devices or printed circuit cards containing such components only in static shielding containers.
6.If necessary to repair a printed circuit card containing a static sensitive component, wear an appropriately grounded wrist strap, work on a conductive surface, use a grounded soldering iron, and use grounded test equipment.
Page iv | Static Warning |
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.