Emerson 5100 installation manual 7000 & 4000 Series ATSs Connectivity Module

2-2 7000 & 4000 Series ATSs Connectivity Module

Device Configurator Screen for 7000 & 4000 Series ATSs with a PM or DPM

If a Power Manager (PM) or Digital Power Meter (DPM) is used with a 7000 & 4000 Series ATS, a button appears on the lower left corner of the Connectivity Module Device Configurator screen. Press the Config PM button to display the Power Manager or Power Meter Configuration screen (right side).

Power Manager or Power Meter Configuration

Enter or change the PM or DPM Name (8 char. max.) and Location (20 char. max.). Several configuration settings must be set appropriately. Press the Update button when finished to save the PM or DPM configuration changes.

Input Name & Output Names (Power Manager only)

For a Power Manager, press the Config I/O Name button to display the Input Name and Output Name screen. Enter or change the names (16 char. max.) of the inputs and outputs. Press the Update button when finished to save.

PM or DPM Configuration

Input & Output Names (PM only)

Press Config I/O Name button to		Output names
display Input & Output Names screen.	Input names

Power Manager

Power Manager

name

Power Manager

location

Press Update button when		Press To PM Config button to return to
finished to save the configuration		Power Manager Configuration screen.
Power Meter				Press Update button when
				finished to save the names.
Power Meter			For a 7ATB (automatic transfer &
			bypass-isolation switch) with a
name
			Power Manager, see page 2-3 for
			the Power Manager IO Settings.
Power Meter
location
					NOTE
			Update the PM, DPM, or Group 5
			Controller first if you need to update
			the server. Do not close the browser
			during the updating process. The
			PM, DPM, or CP update request will
			be discarded if the browser is closed.
	Press Update button when
	finished to save the configuration