Primera Technology LX200 user manual Installing the INK Cartridge, Click StartPrinters and Faxes

Page 16

TOC

INDEX

G. INSTALLING THE INK CARTRIDGE

Your printer has a built-in ink tracking system. This system is designed to warn you if your ink cartridge is low on ink. This ensures your labels will print properly and that the printer can create large batches of labels unattended and worry-free.

In order to make this system work properly, the cartridge must be changed using the procedure listed below. Failure to follow this procedure could result in inaccurate ink level tracking and could cause your print quality to suffer.

Ink cartridge is changed as follows:

1.Click Start>Printers and Faxes

2.Right-click on the Color Label Printer Icon

3.Click on Printing Preferences from the drop-down menu

4.Find the option labeled "Clean/Change Cartridge & Check Ink…" and click "Properties"

5.Click "Change Cartridge"

6.Open the Top Cover of the printer

7.The Cartridge Carrier will align itself to the center of the print area.

8.Press the Cartridge Cover Release to open the Cartridge Holder.

9.Replace/install the cartridge copper end first.

10.Remove the new Cartridge from its packaging. Be sure to remove the

protective tape covering the copper contacts.

12Hardware and Software Settings

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Label Printer All rights reservedPrinting History Table of Contents Interactive Feature in this Thank YOU… Getting StartedChoosing a Good Location Unpacking and Inspection Starter roll of high gloss label stockIdentifying the Parts Computer Specifications Minimum PC SpecificationsHardware and Software Setup Installing the PC SoftwareConnecting Power Connecting the USB Cable / Installing the Printer DriverTOC Installing Label Stock Throat Guide Adjusting the Label Stock TOF TOP of Form Sensor Circular LabelsThrough Hole Labels Using FAN-FOLD Label Stock Click StartPrinters and Faxes Installing the INK CartridgeClick Change Cartridge Aligning the INK Cartridge TOC Using Nicelabel Printing Using a PCCreating a label TOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC Printer Driver Settings To find Driver SettingsPaper Size OrientationPortrait Landscape Print QualityClean/Change Cartridge & Check Ink Levels Clean/PurgeInk Saturation Cartridge AlignmentChange Cartridge Details/Print CounterOutput Mode Sensor TypeOffsets Enable Bi-di PrintingLeft Margin Offset Tear Off Position Top of Form TOFCut Position Solving Registration Problems Image is Vertically OffsetImage is printing horizontally offset TOC Creating a Full Bleed Print Cleaning the Printer Clearing a Label JAMTechnical Support Cleaning the INK CartridgeSource Location Label and Roll Specifications Method 2 Thru-Hole SensingIndex Technical Specifications Index Barcode Wizard 17, 18 Cartridge Alignment
Top Page Image Contents