Primera Technology LX200 user manual Getting Started, Thank YOU…, Choosing a Good Location

Page 5

TOC

INDEX

Section 1: Getting Started

THANK YOU…

...for choosing an LX200 Label Printer. The LX200 Printer will print razor-sharp text and barcodes directly onto rolls of labels, card stock and fan-fold stock.

This User's Manual is your complete step-by-step guide to quickly and easily setting up and printing with your new Label Printer!

A. CHOOSING A GOOD LOCATION

•Place the printer on a flat surface in a location with adequate air circulation to prevent internal heat build up.

•Do not place the printer near heat sources such as radiators or air ducts, or in a place subject to direct sun light, excessive dust, mechanical vibration or shock.

•Allow for adequate clearance in front of the printer to accommodate the printed label stock as it is leaving the printer to avoid the possibility of binding or jamming of the label stock.

•Allow for adequate overhead clearance for opening the top cover to allow easy access to the label stock and ink cartridge.

Getting Started 1

Image 5

Contents All rights reserved Label PrinterPrinting History Table of Contents Interactive Feature in this Choosing a Good Location Getting StartedThank YOU… Starter roll of high gloss label stock Unpacking and InspectionIdentifying the Parts Minimum PC Specifications Computer SpecificationsInstalling the PC Software Hardware and Software SetupConnecting Power Connecting the USB Cable / Installing the Printer DriverTOC Installing Label Stock Throat Guide Circular Labels Adjusting the Label Stock TOF TOP of Form SensorThrough Hole Labels Using FAN-FOLD Label Stock Click Change Cartridge Installing the INK CartridgeClick StartPrinters and Faxes Aligning the INK Cartridge TOC Creating a label Printing Using a PCUsing Nicelabel TOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC To find Driver Settings Printer Driver SettingsOrientation Paper SizePortrait Landscape Print QualityClean/Purge Clean/Change Cartridge & Check Ink LevelsInk Saturation Cartridge AlignmentDetails/Print Counter Change CartridgeSensor Type Output ModeLeft Margin Offset Enable Bi-di PrintingOffsets Cut Position Top of Form TOFTear Off Position Image is Vertically Offset Solving Registration ProblemsImage is printing horizontally offset TOC Creating a Full Bleed Print Clearing a Label JAM Cleaning the PrinterSource Location Cleaning the INK CartridgeTechnical Support Method 2 Thru-Hole Sensing Label and Roll SpecificationsIndex Technical Specifications Barcode Wizard 17, 18 Cartridge Alignment Index