Primera Technology LX200 user manual Change Cartridge, Details/Print Counter

Page 31

TOC

INDEX

Note: You will be prompted to load label stock of 4"x 4" (101.6 mm x 101.6mm) or larger, into the printer. If you have stock of this size or larger, simply click OK. If not see Section 2H for instructions on loading a test sheet to complete the purge print.

The printer will print a purge pattern where swaths of each color are printed to clean the jets of the cartridge. A series of diagonal lines are printed in each color of the cartridge. By examining this pattern you can tell if the cartridge is firing all jets or if the cartridge is dirty and requires further cleaning. While the blocks of black may not print solidly, it is important that the diagonal lines be continuous. Repeat this process until all diagonal lines print without breaks.

Change Cartridge

Click the Change Cartridge button to move the cartridge into position for easy access for replacement. For more information on this see Section 2G. When installing cartridge you will be prompted to align your cartridge as described earlier in this section.

Details/Print Counter

Clicking on the Details button will allow you to view information about printer settings stored on the printer. There is also a print counter in the details window to help you count the number of labels printed since the last time it was reset. Click Reset Counter to set the counter to zero. The Restore Factory Defaults button will restore the printer settings displayed on the details window to factory calibrated defaults.

Printing Using a PC 27

Image 31
Contents All rights reserved Label PrinterPrinting History Table of Contents Interactive Feature in this Thank YOU… Getting StartedChoosing a Good Location Starter roll of high gloss label stock Unpacking and InspectionIdentifying the Parts Minimum PC Specifications Computer SpecificationsConnecting the USB Cable / Installing the Printer Driver Hardware and Software SetupInstalling the PC Software Connecting PowerTOC Installing Label Stock Throat Guide Circular Labels Adjusting the Label Stock TOF TOP of Form SensorThrough Hole Labels Using FAN-FOLD Label Stock Click StartPrinters and Faxes Installing the INK CartridgeClick Change Cartridge Aligning the INK Cartridge TOC Using Nicelabel Printing Using a PCCreating a label TOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC To find Driver Settings Printer Driver SettingsPrint Quality Paper SizeOrientation Portrait LandscapeCartridge Alignment Clean/Change Cartridge & Check Ink LevelsClean/Purge Ink SaturationDetails/Print Counter Change CartridgeSensor Type Output ModeOffsets Enable Bi-di PrintingLeft Margin Offset Tear Off Position Top of Form TOFCut Position Image is Vertically Offset Solving Registration ProblemsImage is printing horizontally offset TOC Creating a Full Bleed Print Clearing a Label JAM Cleaning the PrinterTechnical Support Cleaning the INK CartridgeSource Location Method 2 Thru-Hole Sensing Label and Roll SpecificationsIndex Technical Specifications Barcode Wizard 17, 18 Cartridge Alignment Index