Primera Technology LX200 user manual Hardware and Software Setup, Installing the PC Software

Page 9

TOC

INDEX

Section 2: Hardware and Software Setup

A. INSTALLING THE PC SOFTWARE

The Installer Disc has a menu that will guide you through the process of setting up your duplicator. Please refer to the following for more information on each step:

1.Place the Installer CD in your CDRom Drive. The Installer application should automatically launch in a few moments. If it does, proceed to Step 2. If it does not automatically launch, follow these steps:

•Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive containing the Software Installer disc.

•Double-click Installer.exe

2.In the Installer Application, click the Standard Install button. The on screen instructions will guide you step-by- step through the installation process.

B. CONNECTING POWER

1.Locate the power adapter

supplied with your printer.

2. Place one end of the adapter cord into the power port on the rear panel of the printer.

3.Plug the power cord of the

adapter into an available wall outlet or surge protecting power strip. Once the power cord is connected, the printer can be switched on and off using the power switch.

C.CONNECTING THE USB CABLE / INSTALLING THE PRINTER DRIVER

Connect the printer to your PC with your beige USB 2.0 Cable.

Hardware and Software Settings 5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents All rights reserved Label PrinterPrinting History Table of Contents Interactive Feature in this Getting Started Thank YOU…Choosing a Good Location Starter roll of high gloss label stock Unpacking and InspectionIdentifying the Parts Minimum PC Specifications Computer SpecificationsInstalling the PC Software Hardware and Software SetupConnecting Power Connecting the USB Cable / Installing the Printer DriverTOC Installing Label Stock Throat Guide Circular Labels Adjusting the Label Stock TOF TOP of Form SensorThrough Hole Labels Using FAN-FOLD Label Stock Installing the INK Cartridge Click StartPrinters and FaxesClick Change Cartridge Aligning the INK Cartridge TOC Printing Using a PC Using NicelabelCreating a label TOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC To find Driver Settings Printer Driver SettingsOrientation Paper SizePortrait Landscape Print QualityClean/Purge Clean/Change Cartridge & Check Ink LevelsInk Saturation Cartridge AlignmentDetails/Print Counter Change CartridgeSensor Type Output ModeEnable Bi-di Printing OffsetsLeft Margin Offset Top of Form TOF Tear Off PositionCut Position Image is Vertically Offset Solving Registration ProblemsImage is printing horizontally offset TOC Creating a Full Bleed Print Clearing a Label JAM Cleaning the PrinterCleaning the INK Cartridge Technical SupportSource Location Method 2 Thru-Hole Sensing Label and Roll SpecificationsIndex Technical Specifications Barcode Wizard 17, 18 Cartridge Alignment Index
Top Page Image Contents