Primera Technology LX200 Cleaning the INK Cartridge, Technical Support, Source Location

Page 40

TOC

INDEX

E. CLEANING THE INK CARTRIDGE

It may be necessary to clean the ink cartridge nozzles if you notice reduced print quality, or if you suspect an cartridge nozzle has become slightly dried out or clogged. If you are having print quality problems, follow the steps below:

1.Remove the print cartridge.

2.Moisten a lint-free cloth with water.

3.Hold the cloth against the nozzles

for three seconds. This will “wick” some additional ink onto the damp cloth.

4.Wipe in one direction only.

5.Repeat the process.

F. TECHNICAL SUPPORT

If you have difficulties in operating your Printer, the procedures in this manual and the software User's Guide should, in most cases, solve the problem. If you still have difficulty, contact the technical support number using one of the methods listed below.

Source

Location

 

 

Primera Knowledge Base

www.primera.com/knowledgebase.html

 

 

NiceLabel Software Help files

Open the software. Click on the Help

 

Menu - Contents

 

 

Email Support

www.primera.com/contact_tech_support.cfm

 

 

Chat Support

www.primera.com/knowledgebase.html

 

 

Phone Support

763-475-6669 (Mon - Fri 8 a.m. - 7 p.m CST)

 

 

36Troubleshooting

Image 40
Contents Label Printer All rights reservedPrinting History Table of Contents Interactive Feature in this Thank YOU… Getting StartedChoosing a Good Location Unpacking and Inspection Starter roll of high gloss label stockIdentifying the Parts Computer Specifications Minimum PC SpecificationsHardware and Software Setup Installing the PC SoftwareConnecting Power Connecting the USB Cable / Installing the Printer DriverTOC Installing Label Stock Throat Guide Adjusting the Label Stock TOF TOP of Form Sensor Circular LabelsThrough Hole Labels Using FAN-FOLD Label Stock Click StartPrinters and Faxes Installing the INK CartridgeClick Change Cartridge Aligning the INK Cartridge TOC Using Nicelabel Printing Using a PCCreating a label TOC TOC TOC TOC TOC Creating Barcodes in Nicelabel RSS TOC Printer Driver Settings To find Driver SettingsPaper Size OrientationPortrait Landscape Print QualityClean/Change Cartridge & Check Ink Levels Clean/PurgeInk Saturation Cartridge AlignmentChange Cartridge Details/Print CounterOutput Mode Sensor TypeOffsets Enable Bi-di PrintingLeft Margin Offset Tear Off Position Top of Form TOFCut Position Solving Registration Problems Image is Vertically OffsetImage is printing horizontally offset TOC Creating a Full Bleed Print Cleaning the Printer Clearing a Label JAMTechnical Support Cleaning the INK CartridgeSource Location Label and Roll Specifications Method 2 Thru-Hole SensingIndex Technical Specifications Index Barcode Wizard 17, 18 Cartridge Alignment