Primera Technology 032910-511262 user manual Back

TOC INDEX

3.When the print is complete, rotate disc 180º and

put the disc back in the input bin and repeat step 2 using the same disc.

4.When the second run of the print is complete, you should have a test print that looks similar to the following:

BACK

NOTE:

After printing this image once, rotate this CD so the ARROWS point

to the BACK of the printer and print again.

5 4 3 2 1 0 1- 2- 3- 4- 5-

5BACK

4

3
2
1
0	number) SAME the be (must
-1
		tough lines whose
-2
	number the enter and Find
-3
		Calibration Vertical
-4
-5

5 4 3 2 1 0 1- 2- 3-			4-	5-
5 4 3 2 1 0 -1 -2 -3 4 -5
number) SAME the be (must
		tough lines whose
number the enter and Find
	Calibration Horizontal

5.Along the Vertical axis of the printed disc, find the number whose lines touch. For example, in the above illustration, Enter the number 2 into the Vertical box of the Calibration window and 0 for the Horizontal axis.

6.Select the OK button. Your images should now be centered when printed on a disc.

After your selections have been made, close out of the printer setup window. You are now ready to go to an application program and print. All printer driver selections will stay the same until you change them.

Creating Discs 43