TOC | INDEX |
Change Cartridge
If you need to change cartridges, you can click the Change Cartridge button in the Configuration Utility. This ensures the most accurate tracking of ink levels. To change a cartridge, click the Change Cartridge button. The cartridge holder will move to the center of the Publisher to make it
easier to install the cartridges. Lift the top cover and install the cartridges and described in Section 2 of this manual. Once installed, click the OK button and the system will update your cartridge levels.
Alignment Calibration Print
The Cartridge Alignment prints a test print and then automatically scans the print to configure your printer for bidirectional printing and to align the color and black cartridges for Color+Black printing. It is important to perform this calibration every time you change a cartridge. If you forget to perform this calibration you will be prompted to do so before your first print from the new cartridge.
Image Centering
The Image Centering button will print a test pattern on your disc to help you center the printed image on your disc. If you see a half moon sliver of white
Before you run the centering test print make sure the Publisher has discs and ink cartridges installed, and it is connected and ready to receive a print job. The Publisher will pick a disc and print a scale of numbers on it. You will be prompted to open the Publisher's front cover, rotate the printed disc
180 degrees, reload it into the input, and close the cover. Click OK when ready and the Publisher will pick the disc and print another scale of numbers.
Creating Discs 49