Primera Technology 032910-511262 user manual Setup the Kiosk BIN, Locating Tabs on

Page 20

TOC

INDEX

D. SETUP THE KIOSK BIN

Kiosk Mode allows you to use both of Publisher's Bins as input, doubling your disc capacity from 50 discs to 100 discs. In this mode, the finished discs will be deposited out through the front "reject area" of the Publisher. In Kiosk mode all discs would be ejected in this manner. Rejects can be identified in the stack because they will not be printed in the same manner as successfully recorded discs. Refer to the Kiosk Kit installation instructions below.

•Attach the Output Bin Holder as shown, aligning

	the Locating Tabs on the
	Output Bin Holder with
	the Slots located on the
	underside of the Publisher	Slots
	allowing the holder to
	hang off the edge of the
	table. Notice the slots do
	allow for adjusting the
	position of the output bin.
	If your discs are not
	falling into the bin, you
	will be able to move the	Locating Tabs
	bin slightly to align it.	Locating Tabs
	bin slightly to align it.

•Place the Output Bin on

the Output Bin Holder as shown.

To enable Kiosk Mode, Open PTPublisher - select Options from the Tools menu - find the Options tab - now check the Kiosk Mode box. On a Mac, Kiosk Mode can be enabled in the the Robot Options menu.

16Hardware and Software Setup

Image 20

Contents For Macintosh and PC Printing History Table of Contents Interactive Feature Getting Started Thank YOU…TOC Choosing a Good LocationUnpacking and Inspection Identifying the Parts Front Panel and TopRear Panel PC System Requirements Overview of Operation TOC TOC Installing the MAC Software SetupInstalling the PC Software Loading Media Discs Hardware SetupApplying Power TOC Select Install the software Connecting the USB 2.0 Cable/Installing the DriverInstalling the Printer Driver Windows XP If you are using a Mac Installing Ink Cartridges Setup the Kiosk BIN Locating Tabs onCreating Discs Tutorial Copy a Disc Print only for Autoprinter UsersTOC TOC Copy Project Using PtpublisherProject Types Video Project Data ProjectAudio Project Image Project Add DataAdd Print To Select an exiting labelStart Project Summary Settings Project SummaryProject Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project. PC Disc Publishers Only TOC TOC Rip Audio CD PC Disc Publishers Only TOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Advanced Printer Driver Functions PC Paper Size Non-printable Outer MarginPrint Quality Disc Surface QualityColor Matching Ink Saturation Center The Print Image Inner DiameterCartridge Alignment Back Clean/Change Cartridges & Check Ink Levels Clean/PurgeChange Cartridges DetailsEnable Bi-di Printing Advanced Printer Driver Settings MACDisc Output Location Cartridge to useKiosk Mode Color MatchingSave As Default Restore DefaultsConfig Utility IntensityClean Cartridge Image Centering Change CartridgeAlignment Calibration Print Disc should look like this Label Design Requirements for Other Graphics Programs Maintenance Cleaning the INK CartridgeInterpreting the PUBLISHER’S Indicators Lights LEDInternal Blue LED Lights Technical Support Source LocationTechnical Specifications Inner Diameter 19, 24, 42 Outer Margin 19, 24, 40Print Quality 11, 20, 40 Reject Area