Q-See H264 user manual Mouse, Remote Control, Live View, To Input Values, Setup mode

In addition to the buttons on the front of the DVR, your system can be controlled through the USB mouse and the remote control. We have found that the majority of our customers prefer to operate their DVRs using the USB mouse because of its ease of use and flexibility and our manual is set up with this in mind.

2.2 MOUSE

The mouse is the default tool for navigating through the menus. Specific instructions for its use within a function appear in the appropriate sections of the manual, but a basic overview is below:

In Live View:

Double-click the left button on any camera view in split-screen mode to bring it to full- screen display.

Double-click again to return to split-screen mode.

Right-click to show the control bar at the bottom of the screen.

Right-clicking again will hide the control bar.

In Setup:

Left-click to make a selection. Right-click to cancel setup or return to previous screen.

To Input Values:

Move the cursor to a blank field and click. A virtual keyboard will appear which supports numbers, letters and symbols. The Shift function will access symbols in addition to upper case letters.

Certain values, such as time settings, can be changed using the mouse wheel.

2.3 REMOTE CONTROL

The remote control allows you to perform most of the day-to-day functions from a convenient distance. It functions as a typical remote control with additional buttons allowing you to navigate through menus and control functions. We recommend that you configure your DVR using the mouse controls, reserving the remote control for operations such as live viewing, file search and playback.

It uses two AAA-sized batteries. If the remote’s performance degrades, check the batteries as well as that the IR receiver window on the DVR is unobstructed.

Item	Button	Function
1	POWER	Soft power down switch. Use this
		before unplugging the DVR
2	INFO	Get information about the DVR such
		as HDD space and firmware version
3	REC	Begin recording
4	Numbers	Input numbers in fields or select
		camera
5	Multi-Screen	Choose multi-screen display mode
6	MENU	Opens MENU window
7	SEARCH	Enter SEARCH mode
8	Directional	Move cursor in set up or control PTZ
		camera
9	ENTER	Confirm choice or settings
10	SET +/-	Increase or decrease value in
		SETUP mode
11	Playback	Controls playback functions, includ-
		ing stop, single-frame, fast forward,
		etc.
12	AUDIO	Enable audio input in live mode
13	SEQ	Returns to auto dwell display
		sequence
14	BACKUP	Enters BACKUP menu
15	PTZ	Controls PTZ camera including
	Controls	zoom, focus, iris and speed

1 2 3

4

5

6

7

8

9

10

11

12

13

14

15

36 37