A.3 RACK MOUNTING
The QT446, QT4332, QT4532, QT518, QT5116 and QT536 all use 2U cases and include brackets and screws allowing them to be secured in a standard server rack or server cabinet. These DVRs are designed for horizontal mounting only.
The DVR must rest on a shelf sufficient to hold its weight. The included mounting brackets are only intended to keep the system from shifting and they are not sufficient to suspend the DVR alone. You will also need to provide bolts to attach the brackets to the rack.
Two mounting brackets and four screws are contained in the accessory box that accompanied your DVR. Some brackets will have three holes but only two screws are required to mount the bracket to the DVR.
The flanges to secure the DVR to the rack should be towards the front.
The DVR must have sufficient support when installed. The brackets are only to keep the DVR from moving. Ensure that all four holes on the two mounting brackets line up with holes in the rack.
If you will have limited access to the back of the DVR, it is best to make sure that all camera and other cable connections on the back of the DVR are secure before bolting the brackets to the rack.
Q-SEE PRODUCT WARRANTY
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the following reasons are not within the free service scope of our company:
1.Equipment damage caused by improper operation.
2.Improper equipment operation environment and conditions (e.g., improper power, extreme environmental temperatures, humidity, lightning and sudden surges of electricity).
3.Damage caused by acts of nature (e.g., earthquake, fire, etc).
4.Equipment damage caused by the maintenance of personnel not authorized by
5.Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration process after purchasing our product. To do this, simply fill out the User’s Information Card on our website at
94 | 95 |
