701/702

Users Manual

Selecting the Display Language

The calibrator displays information in five languages. English language is the default. To change the display language, proceed as follows:

1.Press s.

2.Press the third softkey from the left twice.

3.Press dthree times.

4.Press e.

5.Press uor d to highlight your choice of language.

6.Press eto confirm your choice. The language you choose is the power-up default.

7.Press sto exit smode.

Adjusting the Display Contrast

Press u or R to increase contrast. Press L or dto decrease contrast. When the u and d keys are being used to select an item from a list, for example in smode, use the L and R keys.

Setting Up the Date and Time Display

The date and time are optionally displayed at the top of the display during normal operation. In smode you can turn on or off this date and time display. You can also control the format used to display the date and time. You should set the calendar and clock whether or not you use the date and time display, since a timestamp is applied to all saved results. Proceed as follows to set up the time and date displays:

1.Press s.

2.Press the Next Page softkey. The display appears as follows:

24

Page 34
Image 34
Fluke Rev. 4 Selecting the Display Language, Adjusting the Display Contrast, Setting Up the Date and Time Display